Neuspeed HI-FLO Charge Pipe for MK5, MK6, B6, 8P & 8J 2.0T TSI

*Will NOT fit vehicles with 2.0T FSI engines* NEUSPEED's Hi-Flo Air Charge Pipe Conversion replaces the OE smashed and kinked plastic pipe located between the factory intercooler and throttle body. Full diameter all the way through and without any...

Neuspeed HI-FLO K03 Turbo Discharge Conversion for MK5, MK6, 8P & 8J 2.0T TSI

*Will NOT fit 2.0T FSI engines* The NEUSPEED Hi-Flow Turbo Discharge Conversion kit includes all the parts needed to remove serious restriction from the discharge side of the turbocharger. First, a newly machined billet aluminum discharge adapter reduces...

Neuspeed P-FLO Air Intake Kit for MK5, MK6, B6, 8P & 8J 2.0T TSI

*Does NOT fit FSI 2.0T engines or the 2.0T Gen 3* The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in the higher rpm range –...

Neuspeed Factory Intercooler Delete Kit for MK5, MK6, 8P & 8J

The Factory Intercooler Delete Kit is for vehicles using a Front Mount Intercooler (FMIC) that bypasses factory intercooler and is no longer being used. By removing the unused factory intercooler using the FID kit you will get more airflow, better...

034Motorsport Billet Oil Catch Can Kit for Transverse 2.0T TSI

*Will NOT fit Gen 2 TSI Engines found in later model Jetta GLI, Tiguan or Audi TT or the FSI found in early model MK5's* The 034Motorsport Transverse 2.0 TSI Catch Can Kit is here! We've put months of engineering and testing to create the most complete...

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...

iAbed Billet Rear Main Seal Kit for VW/Audi TSI

*Fitment Notes: Will NOT fit vehicles with FSI engines. Will NOT fit MK2 Audi TT FWD models* Kit includes: iABED 06H Billet Rear Crankshaft Seal (1) Spring Loaded Rear Main Seal (8) M6 1.0 20mm SS Socket Cap Screws EA888.X Billet Rear Crankshaft Seal...

iAbed Billet Rear Main Seal Installation Tool for VW/Audi

This iAbed Industries installation tool is required for the installation of the iAbed Billet Rear Main Seal kit for VW/Audi vehicles.

034Motorsport Billet Aluminum Rear Main Seal Kit for Late 1.8T & 2.0T

*Fitment Notes: Will NOT fit 2.0 FSI engines in early model MK5, B6, etc.* 034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone stamped steel factory Rear Main Seal on your 2.0T Volkswagen. This Billet Rear Main...

Fluidampr Crank Pulley for 1.8T & 2.0T TSI

*Please Note: Will NOT fit vehicles with FSI engines* Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful...

034Motorsport StreetSport Engine/Transmission Mount for MK5/6, 8P & 8J 2.0T

034Motorsport's Motorsport StreetSport Mounts for Volkswagen MkV/MkVI Golf/Jetta/GTI/GLI & Audi 8J/8P A3/TT 2.0T models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from...

034Motorsport TrackSport Engine/Transmission Mount for MK5/6, 8P & 8J 2.0T

034Motorsport's Motorsport TrackSport Mounts for Volkswagen MkV/MkVI Golf/Jetta/GTI/GLI & Audi 8J/8P A3/TT 2.0T models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from...

034Motorsport Density Line Motor Mount Pair for MK5/6, 8J & 8P 2.0T

*Will NOT fit VW CC or B6 Passat with TipTronic transmission - Manual Only* We're proud to announce the availability of the Density Line Engine Mount Pair for MkV & MkVI Chassis Volkswagen and 8P & 8J Chassis Audi models! 034Motorsport's Density...

034Motorsport Density Line Motor Mount Set for MK5/6, 8J & 8P 2.0T

*Will not fit 2014 and later model MK6 GLI's* We're proud to announce the availability of the complete Density Line Engine Mount Set for MkV & MkVI Chassis Volkswagen and 8P & 8J Chassis Audi models! 034Motorsport's Density Line Mounts are the...

034Motorsport Billet Aluminum Upper Dogbone Mount Insert for Late MK5, MK6, 8J & 8P

The 034Motorsport Upper Dogbone Mount Insert (patent pending) recommended for any MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI and 8P Audi A3 & 8J Audi TT/TTS/TTRS using any dogbone mount and dogbone mount insert, and is strongly...