034Motorsport High Pressure Fuel Pump Piston Tool for EA888 Gen 3 2.0T & C7/C7.5 4.0T

The 034Motorsport High Pressure Fuel Pump Tool is designed to make the disassembly and reassembly of EA888 Gen 3 2.0T & C7/C7.5 S6/S7/S8/RS7 4.0T high pressure fuel pumps a breeze! This tool was designed for ease of use with a 1/2” ratchet...

EQT Multi-Port Injection Kit (MPI) for MQB 1.8T & 2.0T

Custom ECU Tuning is required to activate and utilize this kit Introducing EQT's Multi-Port Injection supplemental fueling kit. When upgrading your EA888.3 equipped MQB car, the stock fueling becomes a limitation with increased demand. The factory direct...

EQT Tsunami Integrated Surge Tank System LPFP for MQB & MQB Evo

ECU tuning is required to utilize this pump In collaboration with Protec Fuel Pumps, we are very excited to announce the EQT Tsunami Integrated Surge Tank System – a revolutionary modular surge suppression fuel pump system. This...

EQT Pro Series Brushless LPFP for MQB & MQB Evo

ECU tuning is required to utilize this pump PRO SERIES The EQT Pro pump was developed as a perfect upgrade when our standard kit doesn't meet your requirements. This pump will support up to 700whp safely on ethanol. This is a perfect solution to...

IE HPFP Assembly Tool for MQB 2.0T & C7 4.0TT

EASY HPFP INSTALL Upgrading your factory VW/Audi MQB 2.0T or C7/C7.5 4.0TT HPFP with higher flow fuel pump internals? Disassembly & assembly of the factory HPFP housing requires a specialty tool to unthread the internal body from the fuel pump body...

IE HPFP Fuel Pump Upgrade for MQB 2.0T

LEADING FEATURES Highest flowing MQB HPFP upgrade on the market HPFP upgrade for ethanol & larger turbo tunes Fueling support for IE TrueFlex & ethanol tunes Reliably adds a larger fuel ceiling for increased flow The piston diameter...

IE TrueFlex Sensor Harness for MQB

LEADING FEATURES Required for IE TrueFlex MQB tunes Allows for instant adjustments from 91 pump to full E85 Harness for VW MK7 & Audi 8V EA888.3 2.0T engines Sends sensor data in real-time to IE ECU calibrations Includes everything needed to...

034Motorsport High Pressure Fuel Pump Piston Upgrade for EA888 Gen 3 2.0T & EA837 CREC 3.0T

The 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the EA888 Gen 3 2.0T Engines found in the MK7/7.5 Volkswagen GTI/GLI/R, 8V/8V.5 Audi A3/S3, and 8S...

034Motorsport High Pressure Fuel Pump Upgrade for EA888 Gen 3 2.0T

The 034Motorsport High Pressure Fuel Pump Upgrade is designed to conveniently replace the factory high pressure fuel pump found in the 2.0T EA888 Gen 3 engine found in the MK7/7.5 Volkswagen GTI/GLI/R, 8V/8V.5 Audi A3/S3, and 8S Audi TT/TTS.By replacing...

EQT Standard Brushless LPFP for MQB & MQB Evo

ECU tuning is required to utilize this pump STANDARD LPFP The EQT Brushless Low Pressure Fuel Pump (LPFP) is a perfect upgrade for your EA888.3 powered vehicle and is available in both FWD and AWD configurations. This kit is a...

APR High Pressure Fuel Pump for 1.8T & 2.0T Gen 3

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! The APR High Pressure Fuel Pump (HPFP) increases maximum volume of fuel the HPFP can deliver by 37% over stock! In doing so, the direct injection fueling system is capable of satisfying fueling...

APR Port Injection Kit - Stage 3+ MPI for 2.0T MQB

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Please Note: This system is designed for use only where required by an APR turbocharger system upgrade with matching software.*   The APR Multi Port Injection (MPI) System includes...

APR Fueling Kit - Stage 3+ MPI & LPFP for 2.0T MQB

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Please Note: This system is only designed for use with with appropriate software. This kit is designed for NAR vehicles without factory MPI (multi-port injection).* The APR Fueling System is a...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Autotech Fuel Pump Tool for EA888 Gen 3

Gen 3 TFSI fuel pump dissasembly tool. This tool is used to unscrew the fuel pump housing so that new internals may be installed. Used with 1 1/16" socket.