BFI Torque Arm Insert for MQB - Stage 2 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 2 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 1 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

BFI Torque Arm Insert for MQB - Stage 1 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

Assembled by INS Dogbone Mount Hardware Kit for MQB 6 Speed DSG & Manual

*Fitment Note: Does NOT fit DQ381 7 Speed DSG transmissions!* Plan on removing or replacing your dogbone mount? About to install an upper dogbone insert? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield...

Assembled by INS Dogbone Mount Hardware Kit for MQB w/ DQ381 7 Speed DSG

Plan on removing or replacing your dogbone mount? About to install an upper dogbone insert? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their hardware...

APR Billet Pendulum Mount for MQB 7 Speed DQ381

*Fitment Note: Does NOT fit vehicles with the 6 Speed Manual or 6 Speed DQ250 transmission* The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined...

APR Stainless Steel Dogbone Mount Insert for MQB

*Please visually check the application guide for proper fitment as there are multiple subframe options. Always replace your factory 1-time use subframe bolt!* The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which...

Genuine VW / Audi Dogbone Puck Bolt for MQB

N91201001: M14 x 1.5 x 50mm We are sourcing the hardware directly from a local VW dealership, so you're guaranteed a genuine part!

034Motorsport Dogbone Mount Hardware Kit for MQB 6 Speed DSG & Manual

*Fitment Note: Does NOT fit DQ381 7 Speed DSG transmissions!* Complete factory dogbone bolt kit for the 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R. WHAT'S INCLUDED: N91201001 - Bolt, Hex Head, M14x1.5x50 - Qty 1 N10699401 - Bolt, Hex...

Neuspeed Engine Torque Arm Insert for MQB

Under hard acceleration, your entire engine and transmission actually rotate due to compliance with the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...

034Motorsport Billet Aluminum Lower Dogbone Mount Insert for MQB

MQB LOWER DOGBONE MOUNT INSERT This precision-machined billet aluminum insert is designed to fill the large voids in the factory dogbone mount, and limit transmission and engine movement without sacrificing ride quality or introducing any...

034Motorsport Billet Aluminum Upper Dogbone Mount Insert for MQB

The 034Motorsport MQB Upper Dogbone Mount Insert (patent pending) is required for Volkswagen & Audi MQB and MQB EVO vehicles using an aftermarket dogbone mount and dogbone mount insert. Aggressive driving that causes violent drivetrain...