APR Lowering Bumpstops for MK7 & MK8 GTI, Golf R & GLI

APR Lowering Bumpstops are here! They improve handling and ride quality and are designed for use on lowered vehicles such as those with APR Roll-Control Lowering Springs.   Bumpstops are a critical handling and ride-quality component of your...

Whiteline Front Roll Center / Camber Correction Kit

A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tuning of camber settings with up to...

ISC Suspension 370mm Length Coilover Covers (Pair)

When making a large purchase, what is the first thing that should come to mind? Maintenance and care should be what comes to mind and it is no different with coilovers. By maintaining and caring for your coilovers you can drastically reduce likelihood of...

ISC Suspension 300mm Length Coilover Covers (Pair)

When making a large purchase, what is the first thing that should come to mind? Maintenance and care should be what comes to mind and it is no different with coilovers. By maintaining and caring for your coilovers you can drastically reduce likelihood of...

APR Suspension Control Unit for MQB VW w/ DCC

The APR Suspension Control Unit (SCU) Upgrade directly replaces your factory suspension controller with a new unit that enables advanced control over your vehicle's factory electronic shocks. The factory controller only operates in a "soft" or "stiff"...

034Motorsport Dynamic+ RCO Camber & Roll Center Adjusting Ball Joints for MQB

The 034Motorsport Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints for MQB & MQB-Evo Audis and Volkswagens are engineered to significantly improve the handling performance for lowered Mk7/8 Volkswagen Golf/GTI/Golf R & 8V/8V.5/8Y/8S...

Ohlins DCC Cancellation Kit for MK7 GTI & Golf R

This Öhlins DCC Cancellation kit is designed to get rid of the error codes associated with removal of the factory DCC struts.

CJM Industries Strut Tower Drilling Guide for MQB

This product is used to cut out the strut tower sheet metal to allow clearance for camber plate adjustment or dampening adjustment from inside the engine bay. Available in 2.5" or 3" sizes. You will need to supply your own hole saw. Removal of the...

Assembled by INS Suspension Hardware Kit for MQB & MQB Evo

Are you getting ready to do a lowering spring or coilover install? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for all of the suspension hardware. This hardware is...

H&R EBM Electronic Bypass Module for MK7 & MK8

The H&R EBM (Electronic Bypass Module) kit was designed to eliminate the error codes on vehicles equipped with DCC (Dynamic Chassis Control) when upgrading to aftermarket shocks, coilovers or just removing/deleting the system.

EMD Auto MQB Rear Suspension "Reverse Rake" Adapter Pad

If your MQB lowering springs (or even stock springs) exhibit reverse rake, this simple solution is for you! Machined from tough ABS plastic, this piece sits between the OEM rubber pad and the body. When installed, this pad will raise the rear fender by...

iSweep DCC Canceler Kit for MK7 GTI & Golf R

The iSWEEP DCC Canceller prevents the error light from turning on when the factory-equipped electronically controlled suspension system - AUDI Drive Select, AUDI Magnetic Ride, VW Dynamic Chassis Control (DCC) is removed. Perfect for: Coilover kits that...

Neuspeed Wheel Hanger

Wheel with the tire mounted can weigh up to 50 lbs. On top of that you need to align the lug hole opening to the hub so you can start threading the lug bolts.  During this balancing process you can potentially drop the wheel and damage it,...

034Motorsport Rear Subframe Mount Stretch Bolt Kit for AWD MQB

Complete factory rear subframe bolt kit for the 8V/8V.5 Audi A3/S3 Quattro, MkIII Audi TT/TTS Quattro, & MkVII Volkswagen Golf R. We recommend using these new factory stretch bolts to install the 034Motorsport MQB Audi/Volkswagen AWD Rear...

034Motorsport MQB Front Subframe Locking Collar Upgrade Kit for MQB w/ Steel Subframe

034Motorsport is pleased to present the Stainless Steel Subframe Locking Collar Upgrade Kit for the Volkswagen MkVII Golf/GTI/R! Designed to center the subframe using precision-engineered stainless steel insert bushings and large-diameter bolts, this kit...