Engine

aFe Power Rapid Induction Cold Air Intake w/ Pro 5R Filter for MK8 GTI

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! Details Dyno-Proven Gains up to +7 HP and +13 Lbs. x Ft. TQ Outflows Factory Intake by up to 27% Measured Flow: 350 CFM @ 7" H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance 3"...

APR Direct Replacement Air Intake Filter for 1.8T & 2.0T MQB & MQB Evo

APR High Flow Intake Filters are a direct upgrade to your factory intake system! Typically your engine is equipped with a cheap, mass-produced and restrictive paper filter system that must be replaced several times in the life of the vehicle. The APR...

APR Carbon Fiber Engine Cover for 2.0T & 1.8T EA888.3/3B/4/4B

The APR Carbon Fiber Engine Cover is here for a wide range of 1.8T and 2.0T EA888.3/3B/4/4B engines. The cover is made from carbon fiber in a twill pattern with black accents with a gloss finish. The design is similar in spirit to the higher end full...

APR Intake Coolant System Hose - Version 1

When running a larger intake system, such as our own, routing the factory coolant hose under the system may not be possible on some vehicles, or may fit snugly on others. We've redesigned the hose as a plug and play upgrade that neatly runs under the...

BFI Torque Arm Insert for MQB - Stage 2 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 2 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 1 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

BFI Torque Arm Insert for MQB - Stage 1 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

APR Carbon Fiber Engine Cover for EA888.4 - Forged Carbon Fiber

*Fitment Note: Fits 2022+ models ONLY! Will not fit vehicles from 2021 or earlier!* The 2.0T EA888.4 found in the MQB EVO / MK8 platform has possibly the most underwhelming engine cover to grace the 2.0T since its inception generations back. Some...

APR Carbon Fiber Engine Cover for EA888.4 - Carbon Fiber Twill

*Fitment Note: Fits 2022+ models ONLY! Will not fit vehicles from 2021 or earlier!* The 2.0T EA888.4 found in the MQB EVO / MK8 platform has possibly the most underwhelming engine cover to grace the 2.0T since its inception generations back. Some...

APR Intake System Forged Carbon Fiber Cover for MQB Evo

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Fitment Note: Does not fit 2019-2021 Arteon with Gen 3 Engine. 2022+ model Arteon ONLY* The APR Intake System is sold as an open system but can be configured as a closed system design by adding...

APR Intake System Carbon Fiber Twill Cover for MQB Evo

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Fitment Note: Does not fit 2019-2021 Arteon with Gen 3 Engine. 2022+ model Arteon ONLY* The APR Intake System is sold as an open system but can be configured as a closed system design by adding...

APR Intake System Cover for MQB Evo

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Fitment Note: Does not fit 2019-2021 Arteon with Gen 3 Engine. 2022+ model Arteon ONLY* The APR Intake System is sold as an open system but can be configured as a closed system by adding this cover...

APR Intake System for MK8 GTI & 8Y A3

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! This is the ultimate intake system for the 2.0T EA888.4 Engine. It's a true full 109 mm intake system from the dual frontal inlet scoops all the way to the included turbocharger inlet adapter...

Borla S-Type Catback Exhaust w/ Brushed Stainless Tips for MK8 GTI

This 3" diameter system features BORLA®'s classic S-Type muffler and Polyphonic Harmonizer Technology which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a...