APR Roll-Control Front Stabilizer Bar End Links - Spherical

APR's Roll-Control Front Stabilizer Bar End Links improve handling and response through the use of replaceable and swappable spherical bearings, intended for race use. The end links offer a great range of adjustability in both connection geometry and...

CJM Industries Strut Tower Drilling Guide for MQB

This product is used to cut out the strut tower sheet metal to allow clearance for camber plate adjustment or dampening adjustment from inside the engine bay. Available in 2.5" or 3" sizes. You will need to supply your own hole saw. Removal of the...

H&R EBM Electronic Bypass Module for MK7 & MK8

The H&R EBM (Electronic Bypass Module) kit was designed to eliminate the error codes on vehicles equipped with DCC (Dynamic Chassis Control) when upgrading to aftermarket shocks, coilovers or just removing/deleting the system.

RacingLine UnderBody Tunnel Braces for MQB

*Fitment Note: Center chassis brace does NOT fit AWD models - FWD ONLY!* BILLET UNDERBODY TUNNEL BRACES Want to sharpen up your MQB handling responses?These two intricately designed MQB Billet Underbody Tunnel Braces mount under the body to help fight...

Solo-Werks S1 Coilovers for MQB Tiguan

Solo Werks S1 Coilover System - Premium Entry Level Coilover Suspension MK VII Tiguan 2018+ 55mm (W/ Rear Independent Suspension) - All Motors & Drives Lowering Range: Front 35-65mm (1.4"-2.6") Rear 35-70mm (1.4"-2.75") Features at a Glance: ...

B2BFAB Rear Shock Extension Kit for MQB - M10 x 1.5

Introducing our Rear Shock Extender Kit. When lifting a vehicle the amount of available rear down travel is reduced. This kit is designed to extend the shock and introduce nearly 2 in of travel to the rear suspension. For MQB platform vehicles this was...

B2BFAB OEM Axle Bolt Kit for Camber Correcting Lift Kit Install

These are the OEM axle bolts (through the hub into the outer axle joint) which are suggested to be replaced when the front axles are removed such as when installing our Camber Correcting Lift Kit.  Kit consists of 2 bolts for the left and right...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Ball Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with...

B2BFAB Atlas Rear Shock Upgrade Kit for Alltrack, Sportwagen, Tiguan, Taos & more

This is the ultimate kit comprised of OEM Volkswagen parts and hardware. No matter whether you are looking for more suspension travel, or simply a HD rear shock, this is the solution for you!  The Atlas rear shock upgrade is robust and features...

B2BFAB Ball Seat Extended Wheel Bolts

Extended wheel bolts are required when running bolt through style wheel spacers. Our bolts are black oxide coated and M14 x.1.5 thread diameter/thread pitch. This is the common size for most all VW/Audi applications with a five bolt pattern wheel. If you...

B2BFAB Flush Plus Kit for MQB Tiguan

Our B2BFAB Flush Plus spacer kit is comprised of our very own precision machined 20mm front and 25mm rear wheel spacers. This combination was selected to space your wheels out even with the sleek Tiguan body lines. If you're looking to give your Tiguan...