Neuspeed Boost Tap for Gen 3/4 1.8T & 2.0T

The NEUSPEED Boost Tap plugs directly into the intake manifold where the factory Manifold Absolute Pressure (MAP) sensor is located. Installing the Boost Tap is an easy and reliable way to tap into the 1.8 TSI and 2.0 TSI engine (Gen 2.5 and...

aFe Pro Series Engine Oil Pan for 1.8T & 2.0T TSI

*Does NOT fit vehicles with FSI engines* -This oil pan has an increased oil capacity of approximately 1 quart over stock for better performance over a longer duration. -Built-in internal and external fins transfer heat from the oil to the outside air for...

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...

APR Full Catch Can Washer Fluid Reservoir for MQB 1.8T & 2.0T

Some vehicles have a washer fluid reservoir / fill neck located near the engine side motor mount, which blocks the install of our MS100199 Full Catch Can System. Our washer fluid reservoir replaces the factory fill neck with a new system to allow...

034Motorsport Motor Mount Pair Hardware for MQB

Complete factory motor mount and transmission mount bolt kit for the Audi 8V A3/S3, Audi 8S TT/TTS, and Volkswagen MkVII Golf/GTI/R. WHAT'S INCLUDED: N91029602 - Bolt, Double Hex Head, M10x55/M6x12 - Qty 1 N10706901 - Bolt, Hex Head, M10x55 - Qty 1...

iAbed Billet Rear Main Seal Kit for VW/Audi TSI

*Fitment Notes: Will NOT fit vehicles with FSI engines. Will NOT fit MK2 Audi TT FWD models* Kit includes: iABED 06H Billet Rear Crankshaft Seal (1) Spring Loaded Rear Main Seal (8) M6 1.0 20mm SS Socket Cap Screws EA888.X Billet Rear Crankshaft Seal...

iAbed Billet Rear Main Seal Installation Tool for VW/Audi

This iAbed Industries installation tool is required for the installation of the iAbed Billet Rear Main Seal kit for VW/Audi vehicles.

034Motorsport Billet Aluminum Rear Main Seal Kit for Late 1.8T & 2.0T

*Fitment Notes: Will NOT fit 2.0 FSI engines in early model MK5, B6, etc.* 034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone stamped steel factory Rear Main Seal on your 2.0T Volkswagen. This Billet Rear Main...

Fluidampr Crank Pulley for 1.8T & 2.0T TSI

*Please Note: Will NOT fit vehicles with FSI engines* Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful...

034Motorsport VW & Audi Direct Injection Head Port Cleaning Tool

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of...

RacingLine Remote Washer Refill Kit for MK7 Golf R & 8V S3

To fit our Oil Management Kit on Golf 7R and Audi S3 models, you will also need this Remote Washer Refill Kit. Golf 7R and some early Audi S3 models have a different windscreen washer bottle fitment to the other MQB cars, with the reservoir located on...

RacingLine Oil Cooler Kit for 2.0T MQB & MQB Evo

Because cooler oil means a better protected engine. The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine. Why fit an Oil Cooler Kit? Our Oil Cooler Kit is...