EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 33mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

Vossen Cone Seat Lug Bolt Locks - M14 x 1.5 (Set of 4)

Vossen Wheel Lug Bolts are strictly manufactured from Grade 10.9 hardened alloy steel and tested to ensure the safest and highest performing fasteners for aftermarket wheels. Vossen Wheel Lug Bolts are for conical 60 degree lug seats only and are meant...

Vossen Cone Seat Lug Bolts - M14 x 1.5 (Set of 20)

Vossen offers premium, OEM-quality Lug Nuts, Lug Bolts, and Lug Locks for your wheel setup.These accessories are crafted from the strongest raw materials and engineered to maximize both safety and performance for your vehicle. Available in multiple...

Milltek Non-Resonated Catback Exhaust for MK4 R32 (Louder)

Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase...

Milltek Resonated Catback Exhaust for MK4 R32 (Quieter)

Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase...

Milltek Hi-Flow Sports Cats for MK4 R32

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Fitment Note: Requires stage 2 ECU remap and must be fitted with the Milltek Sport cat-back system* OEM Catalysts are commonly very dense and restrictive on gas-flow. The Milltek Hi-Flow Sports...

Milltek Stainless Steel Free-Flow Manifolds for MK4 R32

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! The manifold is the key component part of every exhaust system on a naturally aspirated car. It is what provides the exhaust gases exit from the combustion chamber to allow the engine to breath and...

034Motorsport 17-19mm Adapter Socket Tool

The 034Motorsport 17-19mm Adapter Socket Tool is designed to allow those with 19mm 034Motorsport Stud and Nut sets installed to use their factory 17mm Wheel Bolt Wrench for tightening and loosening. The 034Motorsport 17-19mm is compatible with both...

BFI Motor Mount Hardware for Complete Replacement Mounts

Did you buy a used BFI mount that didn't come with hardware? Lose the hardware we originally provided? No worries, we've got you covered!  This is a hardware kit for MK4/MK5/MK6/MK7 BFI Complete Replacement Engine and Transmission Mounts, as well as...

APR Direct Replacement Air Intake Filter for VW MK4 & MK1 TT

APR High Flow Intake Filters are a direct upgrade to your factory intake system! Typically your engine is equipped with a cheap, mass-produced and restrictive paper filter system that must be replaced several times in the life of the vehicle. The APR...

BFI Billet Crack Pipe for MK4 24V VR6

An absolutely indestructible replacement for the notoriously brittle and leaky plastic OEM VR6 coolant pipe. If your VR6 is losing coolant and you aren't sure where, the crack pipe could be the culprit. These machined billet parts are a great measure of...

BFI 25MM Wheel Spacers for 5x100 & 5x112 - 57.1 Centerbore

These 25mm spacers are made of CNC aluminum and fit all 5x100 & 5x112 VW/Audi vehicles with a 57.1 centerbore. These spacers are both hub and wheel-centric which makes them vibration free. All wheel spacers are sold in pairs. SPECIAL...

BFI 20MM Wheel Spacers for 5x100 & 5x112 - 57.1 Centerbore

These 20mm spacers are made of CNC aluminum and fit all 5x100 & 5x112 VW/Audi vehicles with a 57.1 centerbore. These spacers are both hub and wheel-centric which makes them vibration free. All wheel spacers are sold in pairs. SPECIAL...