BMC Panel Air Filter for MK5, MK6 Golf R, B6, 8P & 8J 2.0T FSI

*Fitment Note: Does NOT fit vehicles equipped with the TSI 2.0T* The panel air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing...

Wagner Tuning Competition Intercooler Kit for MK5 & MK6

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! *Fitment Note: Does NOT fit Audi TT & TTS vehicles with CETA or CESA engine codes* This Competition Intercooler has the following core size (610mm x 440mm x 65mm), providing a 10% larger...

Neuspeed HI-FLO K04 Discharge Conversion Kit for Late 2.0T FSI

*See fitment notes below* The NEUSPEED Hi-Flow Turbo Discharge Conversion - K04 kit includes all the parts needed to remove serious restriction from the discharge side of the turbocharger. First, a newly machined billet aluminum discharge adapter reduces...

Neuspeed HI-FLO K04 Discharge Conversion Kit for Early 2.0T FSI & MK6 Golf R

*See fitment notes below* The NEUSPEED Hi-Flo Turbo Discharge Conversion - K04 kit includes all the parts needed to remove serious restriction from the discharge side of the turbocharger. First, a newly machined billet aluminum discharge adapter reduces...

Neuspeed HI-FLO K03 Discharge Conversion Kit for Late 2.0T FSI

*See fitment notes below* The NEUSPEED Hi-Flow Turbo Discharge Conversion kit includes all the parts needed to remove serious restriction from the discharge side of the turbocharger. First, a newly machined billet aluminum discharge adapter reduces...

Neuspeed HI-FLO K03 Discharge Conversion Kit for Early 2.0T FSI

*See fitment notes below* The NEUSPEED Hi-Flow Turbo Discharge Conversion kit includes all the parts needed to remove serious restriction from the discharge side of the turbocharger. First, a newly machined billet aluminum discharge adapter reduces...

Neuspeed HI-FLO Charge Pipe for 2.0T FSI (Eliminates Sound Amplifier)

*Does NOT fit 2.0T TSI engines* NEUSPEED's Hi-Flo Air Charge Conversion replaces the OE smashed and kinked plastic pipe located between the factory intercooler and throttle body. Full diameter all the way through and without any unnecessary bends, the...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed P-FLO Air Intake Kit for MK5, MK6 Golf R, B6 & 8P 2.0T FSI w/ K04

*Will NOT fit B6 Passat with TipTronic tranmission OR vehicles with TSI engines* The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in...

Neuspeed P-FLO Air Intake Kit for B6 Passat 2.0T FSI TipTronic

The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in the higher rpm range – where most performance drivers need it.  The...

Neuspeed P-FLO Air Intake Kit for MK5, B6 & 8P 2.0T FSI

*Will NOT fit B6 Passat with TipTronic tranmission OR vehicles with TSI engines* The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in...

Neuspeed Factory Intercooler Delete Kit for MK5, MK6, 8P & 8J

The Factory Intercooler Delete Kit is for vehicles using a Front Mount Intercooler (FMIC) that bypasses factory intercooler and is no longer being used. By removing the unused factory intercooler using the FID kit you will get more airflow, better...

Borla S-Type Catback Exhaust for B6 Passat & CC 2.0T

System features mirror polished T-304 stainless steel tips for sharp appearance. BORLA® Cat-Back™ & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust...

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...

034Motorsport Billet Aluminum Rear Main Seal for Early 1.8T & 2.0T

*Fitment Notes: Will NOT fit 2.0 TSI engines in later model MK5, B6, etc. B5 Passat & Audi A4 1.8T Owners - This will only fit engine codes AUG or AWM* 034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone...