034Motorsport Extended Tie Rod End Kit for PQ35, MQB & MQB Evo

Note: MQB-Evo (8Y & MK8) fitment Extended Tie Rods are coming soon! Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or...

BFI Transmission Mount Top Bracket for MQB

Looking for that extra edge for the performance of your MQB chassis vehicle?Made to fit seamlessly with our existing MQB (VW and Audi) transmission mounts, these replacement top plates are a quick change to add extra rigidity to the transmission mount...

Assembled by INS DSG Transmission Service Kit for DQ381

After many requests, we are happy to announce the Assembled by INS DSG Transmission Service Kits are finally available! Don't neglect your vehicle's maintenance. Treat your transmission right with Genuine VW / Audi fluid, a Genuine DSG filter and...

Assembled by INS Subframe Hardware Kits for FWD MQB

Plan on removing or replacing your front or rear subframes? About to install a subframe alignment kit? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their...

APR Roll-Control Coilover System for MQB & MQB Evo

*Fitment Note: Does NOT fit vehicles with torsion beam rear axle* The APR Roll-Control Coilover System offers a wide range of adjustment to fully customize your vehicle's suspension setup! The system comes complete with front and rear struts and dampers,...

034Motorsport Billet Coolant Vent Union for EA888 Gen 3 & Gen 4 2.0T & 1.8T Engines

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant...

RacingLine Replacement O-Rings for Magnetic Oil Pan Drain Plug for Plastic Oil Pan (5 Pack)

Looking for replacement o-rings for your RacingLine magnetic oil pan drain plug on your plastic oil pan MQB? You're in luck!Sold in packs of 5.

Whiteline Front Strut Mount Kit for MQB

Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high...

B2BFAB Upgraded Front Sway Bar End Links for use with Camber Correcting Lift Kit

After testing countless configurations we found the balance of features to perfectly compliment our line of camber correcting lift kits. These links manufactured by Whiteline, with our specifications this kit features an optimized length, robust...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...