EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 33mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

Genuine VW / Audi Dynamic R Logo Wheel Center Caps for MQB EVO - Set of 4

Make your Volkswagen Genuine wheels the center of attention with these dynamic center caps. The dynamic center cap design allows the R logo to self-level and stay upright while the wheels and tires rotate. Installation is simple. Remove the original...

Genuine VW / Audi Dynamic Wheel Center Caps for MQB EVO - Set of 4

Make your Volkswagen Genuine wheels the center of attention with these dynamic center caps. The dynamic center cap design allows the Volkswagen logo to self-level and stay upright while the wheels and tires rotate. Installation is simple. Remove the...

Vossen Cone Seat Lug Bolt Locks - M14 x 1.5 (Set of 4)

Vossen Wheel Lug Bolts are strictly manufactured from Grade 10.9 hardened alloy steel and tested to ensure the safest and highest performing fasteners for aftermarket wheels. Vossen Wheel Lug Bolts are for conical 60 degree lug seats only and are meant...

Vossen Cone Seat Lug Bolts - M14 x 1.5 (Set of 20)

Vossen offers premium, OEM-quality Lug Nuts, Lug Bolts, and Lug Locks for your wheel setup.These accessories are crafted from the strongest raw materials and engineered to maximize both safety and performance for your vehicle. Available in multiple...

CJM Industries Brake Duct Hose Hardware Pack

Each order includes a full kit of hardware for our brake duct kit.  4 - 2.5" hose clamps Bolt pack to mount flanges on brake shields Zip ties to retain the hose 

CJM Industries Brake Duct Hose Kit- Silicone with Wire Coil

Each order includes two sections of hose. Each section is three feet long, already cut to length, which is enough to replace both driver and passenger side of our duct kit. No clamps included. 

CJM Industries Brake Duct Shield with Cooling Slot for MQB (Set of 2)

Each order includes two aluminum brake shields that will fit MQB spindles only. Install requires removing the caliper carrier. Both OEM bolts are one time use and need to be replaced. These are not included: OEM Part N91084901  MK7 Golf...

CJM Industries Brake Duct Hose Flanges for MQB (Set of 2)

Each order includes two 6061 billet aluminum brake duct flanges. One driver side, one passenger side. No hardware included.  MK7 Golf MK7 GTI MK7.5 GTI MK7 Golf R MK7.5 Golf R Audi S3 - 8V Audi A3 - 8V MK7 Jetta/GLI

APR Ignition Coils for EA211 1.5T

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. It's commonplace replacement of factory ignition coils with those taken from the...

034Motorsport 17-19mm Adapter Socket Tool

The 034Motorsport 17-19mm Adapter Socket Tool is designed to allow those with 19mm 034Motorsport Stud and Nut sets installed to use their factory 17mm Wheel Bolt Wrench for tightening and loosening. The 034Motorsport 17-19mm is compatible with both...