B2BFAB Ball Seat Extended Wheel Bolts

Extended wheel bolts are required when running bolt through style wheel spacers. Our bolts are black oxide coated and M14 x.1.5 thread diameter/thread pitch. This is the common size for most all VW/Audi applications with a five bolt pattern wheel. If you...

StopTech Street Rear Brake Pads (Performance Package)

*GTI Owners - This will only fit cars equipped with the Performance Package brakes.  If you are unsure about which brakes your car has, contact us and we'll be happy to help!* StopTech offers a wide selection of replacement, high performance,...

iSweep Front Brake Pads for MK5 & MK6

*Will NOT fit B6 Passat or CC 4Motion AWD* The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for...

iSweep Billet Aluminum Oil Pan for EA888 1.8T & 2.0T

*Will NOT fit FSI 2.0T engines*   The iSWEEP EA888 aluminum oil pan is a billet engine oil pan made from 6061-T6 aluminum by CNC machining. The design places cooling fins on the entire lower surface of the oil pan to demonstrate the cooling...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Front Mount Intercooler for Early MK6 GLI

NEUSPEED's Front Mount Intercooler (FMIC) kit for the VW MKVI Jetta GLI 2.0 TSI 200HP requires absolutely no cutting or trimming of the metal bumper structure or bumper cover. Kit includes intercooler with rubber isolator mounting, billet mounting...

Neuspeed Sport Springs for MK6 GTI & GLI

NEUSPEED Sport Springs are made from the highest quality spring steel for unmatched performance and safety, they will not set or sag. They are precision manufactured in the most technically advanced, state-of-the-art facility in Germany...

Neuspeed Race Springs for MK6 GTI & GLI

NEUSPEED Race Springs are made from the highest quality spring steel for unmatched performance and safety, they will not set or sag. They are precision manufactured in the most technically advanced, state-of-the-art facility in Germany...

Neuspeed Rotor Ring Replacements for Neuspeed BBK - 370x34mm

NEUSPEED offers replacement rotor rings with the necessary hardware to refresh your NEUSPEED 2-Piece Front Brake Rotor Kit (Part # 9947LR only). Kit Contents: Rotor Ring (2) - 370mm x 34mm, Grey Iron, Heat Treated, Slotted, 48 Curved Veins, Directional...

Neuspeed Front Mount Intercooler for MK6 GLI 2.0T Gen 3

NEUSPEED's Front Mount Intercooler (FMIC) kit for the VW MKVI Jetta GLI 2.0 TSI 210HP requires absolutely no cutting or trimming of the metal bumper structure or bumper cover. Kit includes intercooler with rubber isolator mounting, billet...

Neuspeed P-FLO Air Intake Kit for MK6 & B7 1.8T & 2.0T Gen 3 w/o SAI

The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in the higher rpm range – where most performance drivers need it. The...

Neuspeed HI-FLO Charge Pipe for MK6 & B7 1.8T & 2.0T Gen 3

NEUSPEED's Hi-Flo Air Charge Pipe replaces the OE smashed and kinked plastic pipe located between the factory intercooler and throttle body. Full diameter all the way through and without any unnecessary bends, the Hi-Flo Air Charge Pipe is recommended...

Neuspeed HI-FLO K04 Turbo Discharge Conversion for MK5, MK6, 8P & 8J 2.0T TSI

*Will NOT fit 2.0T FSI engines* Designed for MOST aftermarket K04 turbo conversion kits, the NEUSPEED K04 Hi-Flow Turbo Discharge Pipe replaces the restrictive EO plastic pipe on the outlet side of the turbocharger. Notes: CARB Exempt. EO#...

Neuspeed P-FLO Air Intake Kit for MK6 & B7 1.8T & 2.0T Gen 3 w/ SAI

The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in the higher rpm range – where most performance drivers need it. The...

Neuspeed HI-FLO Charge Pipe for MK5, MK6, B6, 8P & 8J 2.0T TSI

*Will NOT fit vehicles with 2.0T FSI engines* NEUSPEED's Hi-Flo Air Charge Pipe Conversion replaces the OE smashed and kinked plastic pipe located between the factory intercooler and throttle body. Full diameter all the way through and without any...