B2BFAB Rear Shock Extension Kit for MQB - M10 x 1.5

Introducing our Rear Shock Extender Kit. When lifting a vehicle the amount of available rear down travel is reduced. This kit is designed to extend the shock and introduce nearly 2 in of travel to the rear suspension. For MQB platform vehicles this was...

EMD Auto 5x112 20mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto 5x112 17.5mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto 5x112 15mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto 5x112 10mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

eMMOTION Rear Sway Bar Upgrade for MQB AWD

For those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the Volkswagen Golf R (MK7 & MK7.5). Designed around a package with our lowering spring kit, the rear sway bar upgrade will...

eMMOTION Rear Sway Bar Upgrade for MQB FWD

For those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the MK7/MK7.5 Golf & GTI. Intended to be paired with our lowering spring kit, the rear sway bar upgrade will reduce body roll to create...

EMD Auto Adjustable Rear Sway Bar End Link Set for MQB (w/ Dust Boots)

Higher quality end links are a must when upgrading to a stiffer sway bar!   Our end links serve two primary purposes: - Steel body will not flex or break under the load of a stiff sway bar - Adjustable length allows for removal of pre-load on...

EMD Auto MQB Rear Suspension "Reverse Rake" Adapter Pad

If your MQB lowering springs (or even stock springs) exhibit reverse rake, this simple solution is for you! Machined from tough ABS plastic, this piece sits between the OEM rubber pad and the body. When installed, this pad will raise the rear fender by...

eMMOTION Lowering Spring Kit for MK7/7.5 Golf

Are you looking to lower your Golf, but are concerned with diminished ride quality? Designed with the daily driver in mind, eMMOTION lowering springs by Emmanuele Design will provide the improved aesthetics of a lowered vehicle, without...

eMMOTION Lowering Spring Kit for MK7/7.5 Golf SportWagen

*Fits FWD & 4Motion AWD vehicles* Are you looking to lower your Golf SportWagen, but are concerned with diminished ride quality? Designed with the daily driver in mind, eMMOTION lowering springs by Emmanuele Design will provide the improved...

B2BFAB OEM Axle Bolt Kit for Camber Correcting Lift Kit Install

These are the OEM axle bolts (through the hub into the outer axle joint) which are suggested to be replaced when the front axles are removed such as when installing our Camber Correcting Lift Kit.  Kit consists of 2 bolts for the left and right...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...