1.8T

Bilstein B14 PSS Coilovers for MK7 Golf & Golf Sportwagen

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for...

South Bend Clutch Stage 4 Extreme Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 4 EXTREME: This is a "build to order" clutch kit intended for cars with HP modifications exceeding the stage 3 parameters. The Race Engineered pressure plate is modified for maximum plate load. The discs are puck design with sprung and un-sprung...

South Bend Clutch Stage 3 Drag Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 3 DAILY: Recommended for single mass flywheel (SMF) when original design is DMF. This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with...

South Bend Clutch Stage 3 Endurance Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 3 DAILY: Recommended for single mass flywheel (SMF) when original design is DMF. This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with...

South Bend Clutch Stage 3 Daily Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 3 DAILY: Recommended for single mass flywheel (SMF) when original design is DMF. This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with...

South Bend Clutch Stage 2 Drag Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 2 DAILY: Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two...

South Bend Clutch Stage 2 Endurance Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 2 DAILY: Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two...

South Bend Clutch Stage 2 Daily Kit w/ Flywheel for 5 Speed 1.8T Gen 3

STAGE 2 DAILY: Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two...

StopTech Drilled & Slotted Sport Front Brake Rotors 288x25 (Pair)

StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech SportStop Cross-Drilled & Slotted rotors. SportStop Drilled & Slotted brake rotors prevent glazing of the...

StopTech Slotted Sport Front Brake Rotors 288x25 (Pair)

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits...

Assembled by INS Inner CV Bolt Kit for MQB & MQB Evo

Plan on working on your suspension or axles? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their hardware. This hardware is not meant to be re-used. We...

Assembled by INS Outer Axle Bolt Kit for MQB & MQB Evo

Plan on working on your suspension or axles? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their hardware. This hardware is not meant to be re-used. We...

034Motorsport Billet Oil Filter Housing for EA888 Gen 3 & Gen 4

*Fitment Note: Does not fit early 2.0T engines found in MK6 GLI's* PRODUCT DESCRIPTION: The 034Motorsport Billet Oil Filter Housing for EA888 Gen 3/4 2.0T Engines is designed to replace your factory plastic oil filter housing which is prone to warping,...

H&R Sport Springs for MK7/7.5 Golf Sportwagen FWD

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in...

H&R Sport Springs for MK7/7.5 Alltrack & Sportwagen 4Motion

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in...