Motul RBF600 Racing Brake Fluid - 1/2L

TYPE OF USE: All types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3...

eMMOTION Rear Sway Bar Upgrade for MQB FWD

For those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the MK7/MK7.5 Golf & GTI. Intended to be paired with our lowering spring kit, the rear sway bar upgrade will reduce body roll to create...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Ball Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with...

B2BFAB Ball Seat Extended Wheel Bolts

Extended wheel bolts are required when running bolt through style wheel spacers. Our bolts are black oxide coated and M14 x.1.5 thread diameter/thread pitch. This is the common size for most all VW/Audi applications with a five bolt pattern wheel. If you...

B2BFAB Cargo Hooks for Golf, Alltrack, Taos, Tiguan & Atlas

Secure your cargo/groceries to your unused rear seat top tether anchor points. Takes only seconds to put in place and they prevent your groceries from sliding around, tipping over, or spilling. Can easily be detached and stowed under the tire well cover...

iSweep Power Brace - Rear Upper Arm Brace for MK7 & 8V FWD

*Does NOT fit 4Motion or Quattro AWD vehicles* The iSWEEP Rear Member Brace attaches to the inner area of the rear sub-frame to provide dramatic rigidity to the pitch and roll motion of the vehicle. Keeping the rear alignment specs intact by suppressing...

iSweep Power Brace - Front Lower Arm for MQB (Steel Subframe)

Introducing the iSWEEP Lower Front Arm Power Brace, the perfect solution for those looking to improve the handling and stability of their vehicle. This specially designed brace connects two points of the front lower subframe axis, significantly...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Brake Pad Wear Sensor Bypass

If you have installed a new big brake kit or installed new brake pads that do not include a brake pad wear sensor wire, then this is for you! We have developed a bypass device to get rid of the annoying error on your dash. This is an easy plug-and-play,...

Neuspeed Engine Torque Arm Insert for MQB

Under hard acceleration, your entire engine and transmission actually rotate due to compliance with the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...

Neuspeed Wheel Hanger

Wheel with the tire mounted can weigh up to 50 lbs. On top of that you need to align the lug hole opening to the hub so you can start threading the lug bolts.  During this balancing process you can potentially drop the wheel and damage it,...