034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Ball Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with...

B2BFAB Ball Seat Extended Wheel Bolts

Extended wheel bolts are required when running bolt through style wheel spacers. Our bolts are black oxide coated and M14 x.1.5 thread diameter/thread pitch. This is the common size for most all VW/Audi applications with a five bolt pattern wheel. If you...

B2BFAB 25mm Wheel Spacer Pair - 5x100 & 5x112 57.1mm CB

Our B2BFAB Wheel Spacers are the perfect way to widen your stance to give you the look you want or clearance you need. Each spacer is precision CNC machined from billet T-6061 aluminum and features our integrated pry slots so getting stuck on...

B2BFAB 20mm Wheel Spacer Pair - 5x100 & 5x112 57.1mm CB

Our B2BFAB Wheel Spacers are the perfect way to widen your stance to give you the look you want or clearance you need. Each spacer is precision CNC machined from billet T-6061 aluminum and features our integrated pry slots so getting stuck on...

B2BFAB 15mm Wheel Spacer Pair - 5x100 & 5x112 57.1mm CB

Our B2BFAB Wheel Spacers are the perfect way to widen your stance to give you the look you want or clearance you need. Each spacer is precision CNC machined from billet T-6061 aluminum and features our integrated pry slots so getting stuck on...

iSweep DCC Canceler Kit for MK7 GTI & Golf R

The iSWEEP DCC Canceller prevents the error light from turning on when the factory-equipped electronically controlled suspension system - AUDI Drive Select, AUDI Magnetic Ride, VW Dynamic Chassis Control (DCC) is removed. Perfect for: Coilover kits that...

iSweep Power Brace - Rear Upper Arm Brace for MK7 & 8V FWD

*Does NOT fit 4Motion or Quattro AWD vehicles* The iSWEEP Rear Member Brace attaches to the inner area of the rear sub-frame to provide dramatic rigidity to the pitch and roll motion of the vehicle. Keeping the rear alignment specs intact by suppressing...

iSweep Power Brace - Center Floor Brace for MQB

The iSWEEP 3-piece Center Floor Brace connects the supporting region of the rear floor brace and the suspension trailing arms to increase chassis rigidity. By making the chassis stiffer in these areas, the suspension mechanism moves more liberally for a...

iSweep Power Brace - Center Floor Brace for FWD MQB

*Does NOT fit 4Motion or Quattro AWD vehicles* The iSWEEP Center Floor Brace is a direct replacement of the factory floor brace. By increasing rigidity to the floor, the twisting of the chassis can be suppressed even more than before. Fits: Audi A3 (8V)...

iSweep Power Brace - Front Lower Arm for MQB (Steel Subframe)

Introducing the iSWEEP Lower Front Arm Power Brace, the perfect solution for those looking to improve the handling and stability of their vehicle. This specially designed brace connects two points of the front lower subframe axis, significantly...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed 27mm Race Series Rear Sway Bar for MK7 & 8V FWD

NEUSPEED RACE SERIES Anti-Roll Bar gives you the ultimate in handling; precision engineered with smooth mandrel bends, aerospace-quality steel, graphite impregnated urethane bushings, hardware and sub-frame support brackets. Recommended for...

Neuspeed Wheel Hanger

Wheel with the tire mounted can weigh up to 50 lbs. On top of that you need to align the lug hole opening to the hub so you can start threading the lug bolts.  During this balancing process you can potentially drop the wheel and damage it,...