Whiteline Front Strut Mount Kit for MQB

Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high...

Whiteline Front Lower Control Arms for MQB (Max-C)

IMPORTANT NOTES - Complete pair of Alloy arms - adds 0.5 to 3.0 deg positive caster and -0.25deg camber Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press...

RacingLine Uprated Stainless Steel Front Brake Line Kit for MQB & MQB Evo

The pinnacle of brake line technology, race-proven in the most demanding of conditions. WHAT DO THE BRAKE LINES DO? These direct-replacement RacingLine Brake Lines help to avoid that spongy pedal under demanding conditions as...

RacingLine Stage 3 2-Piece Rear Brake Rotor Upgrade for MQB & MQB Evo

*Please Note: Cars with smaller, 300x12mm non ventilated rear rotors will need OE caliper upgrade to the larger size before fitment of these discs* Our Stage 3 Two-Piece Performance Rear Disc/Rotor upgrade is the perfect upgrade to match the...

Genuine VW / Audi Strut Mount Bearing for MQB

This is a genuine replacement front upper strut mount bearing for most VW & Audi MQB models. Sourced from our local VW dealership, so you're guaranteed a genuine part!   Part Number: 5Q0 412 249 E, 5Q0412249E, 5Q0-412-249-E

034Motorsport Strut Mount Bearing for MQB & MQB Evo

Make the most out of your new Density Line Strut Mounts and replace the upper strut bearing while you're in there. These front bearings see a lot of load from the suspension, and can wear and become noisy over time. This factory replacement strut bearing...

ST XTA Plus 3 Coilovers for MK7 GTI & Golf R

The ST XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge. From the factory, the ST XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression...

Neuspeed Sport Brake Lines for 8V A3 FWD, MK7 Golf 1.8T & MK7/7.5 GTI Non-Performance Pack

NEUSPEED Sport Brake Lines are a great way to improve the performance and safety of your Audi/VW. The stainless steel design resists line expansion associated with OEM rubber lines and is more resistant to being punctured and/or collapsing...

Neuspeed Sport Brake Lines for MK7 & MK7.5 GTI w/ Performance Pack

NEUSPEED Sport Brake Lines are a great way to improve the performance and safety of your Audi. The stainless steel design resists line expansion associated with OEM rubber lines and is more resistant to being punctured and/or collapsing. Upgrading...

B2BFAB Upgraded Front Sway Bar End Links for use with Camber Correcting Lift Kit

After testing countless configurations we found the balance of features to perfectly compliment our line of camber correcting lift kits. These links manufactured by Whiteline, with our specifications this kit features an optimized length, robust...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...