CJM Industries Lower Cubby Switch Panel for MK7/7.5 Golf, GTI & Golf R

*This is for a panel only, no switches included* Looking to install switches in your MK7 but want to keep your interior clean? This might be for you! This fits between the input plug in the lower cubby to install one to four switches. Made of...

CJM Industries Steering Column Gauge Pod for MK7/7.5 Golf, GTI & Golf R (60mm)

*This is for a pod only, no gauges included* This pod comes with 3M VHB tape to adhere it to the top of your steering column.  Installing this pod will limit the range of motion of your steering wheel. If you typically position the wheel...

CJM Industries Coin Tray Switch Panel for MK7/7.5 Golf, GTI & Golf R

*This is for a panel only, no switches included* Looking to install switches in your MK7 but want to keep your interior clean? This might be for you! This fits in the coin tray on the driver side to install one to four carling style switches (38x21...

CJM Industries Lower Cubby Pod for MK7/7.5 Golf, GTI & Golf R

*This is for a pod only, no gauges included* Looking to install gauges in your MK7 but want to keep your interior clean? This pod might be for you! This fits between the input plug in the lower cubby to install one or two 52mm gauges. Made of 3D...

CJM Industries Steering Column Gauge Pod for MK7/7.5 Golf, GTI & Golf R (52mm)

*This is for a pod only, no gauges included* This pod comes with 3M VHB tape to adhere it to the top of your steering column.  Installing this pod will limit the range of motion of your steering wheel. If you typically position the wheel...

CJM Industries Rear Headrest Delete Plugs for MK7 & MK7.5

A simple solution to cover up the open hole in the top of the rear seat when the headrests are removed. These plugs interface with the OEM mechanism to retain the delete plug with tension. These are held firmly in place and will not create...

CJM Industries Coin Tray Pod for MK7 & MK7.5

*This is for a pod only, no gauges included* Looking to install gauges in your MK7 but want to keep your interior clean? This pod might be for you! This fits in the coin tray on the driver side to install one or two 52mm gauges. Made of 3D printed...

CJM Industries Coin Tray Air Lift 3P/3H Controller Mount for MK7 & MK7.5

*This is for the controller mount only! This does NOT include a compartment or a controller!* Made of 3D printed ABS composite, textured front surface.  Requires drilling a hole in the back of the coin tray to install wiring. Coin tray still...

CJM Industries Card Holder Cover for MK7/7.5 Golf & GTI

Tired of cleaning the card slots in the Golf/Gti console? Just cover it up! Made of 3D printed ABS composite, textured front surface (not a perfect match to OEM texture, see pictures). It will not fit R models that already have a sliding door...

CJM Industries Cup Holder Delete Panel for MK7/7.5 Golf & GTI

Tired of looking at that nasty cup holder you've never cleaned? Just cover it up! Made of 3D printed ABS composite, textured front surface. The panel can only be installed with the pull tab in the back. It will not fit R models that already have a...

RacingLine Carbon Fiber Rear Body Brace for MK7 & MK8

Modern cars like the MQB platform run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use,...

RacingLine Billet DSG Gearshift Paddles for MK7

It's all about the attention to detail. And what is more important than the controls of your car that you see and touch every single time you drive? RacingLine's new DSG Paddle Replacements are exquisite CNC-machined billet aluminium blades, beautiful...