H&R Sport Springs for MK7/7.5 Golf Sportwagen FWD

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in...

RacingLine UnderBody Tunnel Braces for MQB

*Fitment Note: Center chassis brace does NOT fit AWD models - FWD ONLY!* BILLET UNDERBODY TUNNEL BRACES Want to sharpen up your MQB handling responses?These two intricately designed MQB Billet Underbody Tunnel Braces mount under the body to help fight...

ST XTA Coilovers for MK7 Golf

The ultimate in performance, style and handling. ST height adjustable Coilover kits are precision engineered and road tested to the highest standards of the German TUV. Our threaded shock Bodies allow you to customize vehicles ride height to the maximum,...

ST XA Coilovers for MK7 Golf

The ultimate in performance, style and handling. ST height adjustable Coilover kits are precision engineered and road tested to the highest standards of the German TUV. Our threaded shock Bodies allow you to customize vehicles ride height to the maximum,...

ST X Coilovers for MK7 Golf

The ultimate in performance, style and handling. ST height adjustable Coilover kits are precision engineered and road tested to the highest standards of the German TUV. Our threaded shock Bodies allow you to customize vehicles ride height to the maximum,...

Solo-Werks S1 Coilovers for MK7 w/ 50mm Front Strut & Independent Rear

Solo Werks S1 Coilover System - Premium Entry Level Coilover Suspension MK VII 15+ 50mm (W/ Rear Multi-Link Suspension) - Gas Motors Lowering Range: Front 35-65mm (1.4"-2.5") Rear 35-70mm (1.4"-2.75") Features at a Glance: 3-Year Limited Warranty ...

B2BFAB Rear Shock Extension Kit for MQB - M10 x 1.5

Introducing our Rear Shock Extender Kit. When lifting a vehicle the amount of available rear down travel is reduced. This kit is designed to extend the shock and introduce nearly 2 in of travel to the rear suspension. For MQB platform vehicles this was...

eMMOTION Lowering Spring Kit for MK7/7.5 Golf SportWagen

*Fits FWD & 4Motion AWD vehicles* Are you looking to lower your Golf SportWagen, but are concerned with diminished ride quality? Designed with the daily driver in mind, eMMOTION lowering springs by Emmanuele Design will provide the improved...

B2BFAB OEM Axle Bolt Kit for Camber Correcting Lift Kit Install

These are the OEM axle bolts (through the hub into the outer axle joint) which are suggested to be replaced when the front axles are removed such as when installing our Camber Correcting Lift Kit.  Kit consists of 2 bolts for the left and right...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Ball Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with...

B2BFAB Atlas Rear Shock Upgrade Kit for Alltrack, Sportwagen, Tiguan, Taos & more

This is the ultimate kit comprised of OEM Volkswagen parts and hardware. No matter whether you are looking for more suspension travel, or simply a HD rear shock, this is the solution for you!  The Atlas rear shock upgrade is robust and features...