034Motorsport Extended Tie Rod End Kit for PQ35, MQB & MQB Evo

Note: MQB-Evo (8Y & MK8) fitment Extended Tie Rods are coming soon! Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 33mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

034Motorsport Dogbone Mount Hardware Kit for MK5, MK6, 8J & 8P

Factory dogbone bolt kit for the MkV/MkVI Volkswagen and 8J/8P Audi. We recommend using these new factory stretch bolts when installing a new dogbone mount pair or the 034Motorsport's Billet Spherical Dogbone Mount. WHAT'S INCLUDED: N10558002 - Bolt,...

034Motorsport Strut Bearing for MK5, MK6, 8J & 8P

Make the most out of your new strut mounts and replace the upper strut bearing while you're in there.  These front bearings see a lot of load from the suspension, and can wear and become noisy over time.  This simple replacement will make for...

034Motorsport 17-19mm Adapter Socket Tool

The 034Motorsport 17-19mm Adapter Socket Tool is designed to allow those with 19mm 034Motorsport Stud and Nut sets installed to use their factory 17mm Wheel Bolt Wrench for tightening and loosening. The 034Motorsport 17-19mm is compatible with both...

BFI Motor Mount Hardware for Complete Replacement Mounts

Did you buy a used BFI mount that didn't come with hardware? Lose the hardware we originally provided? No worries, we've got you covered!  This is a hardware kit for MK4/MK5/MK6/MK7 BFI Complete Replacement Engine and Transmission Mounts, as well as...

SuperPro Front Roll Center Adjusting Ball Joint Kit for MK5 & MK6

Looking for a little more camber adjustment on your MK5 or MK6 platform vehicle? The SuperPro roll center adjusting ball joint kit allows for some camber adjustment (Up to -.5 per side) that the factory control arms lack. The SuperPro roll center...