aFe Magnum Flow Air Filter for VW MK4 & Audi TT MK1

Constructed with 100% polyurethane on all sides, this high flow OE replacement performance filter will outflow the stock paper filter for improved horsepower and torque. Multiple layers of progressively finer mesh gauze media provides maximum convenience...

Solo-Werks S1 Coilovers for MK4 Golf, GTI, Jetta, New Beetle Coupe & MK1 TT FWD

Solo Werks S1 Coilover System - Premium Entry Level Coilover Suspension MK IV 98'-05' 2wd Lowering Range: Front- 40-70mm (1.5-2.75") Rear- 40-70mm (1.5-2.75") Features at a Glance: 3-Year Limited Warranty Warrants against Construction and Component...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Ball Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with...

B2BFAB Ball Seat Extended Wheel Bolts

Extended wheel bolts are required when running bolt through style wheel spacers. Our bolts are black oxide coated and M14 x.1.5 thread diameter/thread pitch. This is the common size for most all VW/Audi applications with a five bolt pattern wheel. If you...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Engine Torque Damper Bushing for MK4

Under hard acceleration, your entire engine and transmission actually rotate due to compliance in the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...

Neuspeed SofSport Springs for MK4 GTI 24V VR6

Made in Germany by ISO 9002 certified spring-winding specialists. Neuspeed springs reduce body roll during cornering and front end dive under heavy braking. Plus, Neuspeed spring kits reduce wheel-well gap to create a more aggressive look for your car...

Neuspeed Front Upper Strut Tie Bar for MK4 24V VR6 & R32

Neuspeed Front Upper Strut Tie-Bar. Connects the left and right side upper strut mounts in your engine compartment to increase chassis rigidity. The result is improved steering response, especially on cars with high-performance wheel & tire packages...

Neuspeed Short Shift Kit for MK4 6 Speed

The NEUSPEED solid billet steel short shifter easily installs on to transmission's selector shaft. The NEUSPEED short shift kit reduces the throw length between gears by approximately 40% - this is the absolute maximum reduction possible...

Neuspeed Race Series Air Intake Kit for MK4 24V VR6

NEUSPEED's new Race Series Cold Air Intake features the largest diameter tubing - 3" for the most free-flowing intake available to make the most horsepower. Manufactured using lightweight aluminum tubing, with a black powder coat wrinkle finish, our kit...

Neuspeed P-FLO Replacement Air Filter for MK4 VR6

NEUSPEED's P-Flo filters are a high-performance, multi-layer cotton gauze air filter that can be cleaned, re-oiled, and used many times over. Notes: Replacement filter for P-Flo Kit numbers: 65.02.85, 65.10.73, 65.10.74 Re-oil amount: 25 grams...