BMC Panel Air Filter for VW MK4 & MK1 TT

The panel air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more...

Wavetrac Differential for Early 02J FWD 5 Speed through 2004

Fits VW Mk4 5 speed manual (bolt in axle flanges):MK4 GTI/Golf/Jetta/Beetle 2.0L/12V VR6/TDI/1.8/1.8T/V5MK3 Jetta TDI 5-speedThe 180WK 02J will fit until 2004 (114mm ring gear inner diameter)The 181WK 02JB's after 2004 will have a 113mm ring gear inner...

StopTech Drilled & Slotted Sport Rear Brake Rotors 232x9 (Pair)

*Does NOT fit 337, 20th AE GTI, MK4 GLI or Quattro Audi TT with larger brakes* Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of...

StopTech Drilled & Slotted Sport Front Brake Rotors for MK4 288x25 (Pair)

*Does NOT fit 337, 20th AE GTI or MK4 GLI with larger brakes* StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech SportStop Cross-Drilled & Slotted rotors...

StopTech Slotted Sport Front Brake Rotors for MK4 288x25 (Pair)

*Does NOT fit 337, 20th AE GTI or MK4 GLI with larger brakes* Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust...

aFe Magnum Flow Air Filter for VW MK4 & Audi TT MK1

Constructed with 100% polyurethane on all sides, this high flow OE replacement performance filter will outflow the stock paper filter for improved horsepower and torque. Multiple layers of progressively finer mesh gauze media provides maximum convenience...

Solo-Werks S1 Coilovers for MK4 Golf, GTI, Jetta, New Beetle Coupe & MK1 TT FWD

Solo Werks S1 Coilover System - Premium Entry Level Coilover Suspension MK IV 98'-05' 2wd Lowering Range: Front- 40-70mm (1.5-2.75") Rear- 40-70mm (1.5-2.75") Features at a Glance: 3-Year Limited Warranty Warrants against Construction and Component...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Ball Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with...

B2BFAB Ball Seat Extended Wheel Bolts

Extended wheel bolts are required when running bolt through style wheel spacers. Our bolts are black oxide coated and M14 x.1.5 thread diameter/thread pitch. This is the common size for most all VW/Audi applications with a five bolt pattern wheel. If you...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Engine Torque Damper Bushing for MK4

Under hard acceleration, your entire engine and transmission actually rotate due to compliance in the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...