034Motorsport Repair / Update Harness for VW / Audi 1.8T w/ 4 Wire Coils

The VW and Audi 1.8T engine, due to the proximity of the coils on the valve cover near the exhaust, suffer from harness degredation.  This is surprisingly common on cars less than 5 years old.  The dealer recommends replacing the entire engine...

034Motorsport StreetSport Engine / Transmission Retrofit Kit for MK4 1.8T

The Motorsport Line StreetSport Motor Mount Retrofit Kit for the Mk4/Mk1 chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration,...

034Motorsport Flywheel Bolts for 1.8T 06A

06A Flywheel bolt for Mk4 VW 1.8T with triple square allen head. Priced individually. 6-pieces are required for one flywheel.

034Motorsport High Flow Stock Fit Exhaust Manifold for Transverse 1.8T

*Please Note: This manifold does not fit the TT225 or S3 K04-023. Please verify your application before ordering.* Looking for a high flow manifold, but don't want to reconfigure your engine compartment?  We made this manifold for you. Using...

South Bend Clutch Stage 3 Drag Kit for MK4 6 Speed

STAGE 3 DRAG: Drag racing requires a Single Mass Steel Flywheel to be included with each kit when the original design is Dual Mass Flywheel. This clutch package is built to handle heavily modified cars and designed to function according to the specific...

South Bend Clutch Stage 3 Endurance Kit for MK4 6 Speed

STAGE 3 ENDURANCE: Recommended for single mass flywheel (SMF) when original design is DMF to achieve optimal performance. This kit uses the same Race Engineered SFI approved pressure plate as stage 3 daily package. The disc is designed for the special...

South Bend Clutch Stage 3 Daily Kit for MK4 6 Speed

STAGE 3 DAILY: Recommended for single mass flywheel (SMF) when original design is DMF. This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with...

South Bend Clutch Stage 2 Drag Kit for MK4 6 Speed

STAGE 2 DRAG: Drag racing requires a Single Mass SFI approved Flywheel to be included with each kit when the original design is Dual Mass. This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings...

South Bend Clutch Single Mass Steel Flywheel for MK4 1.8T 6 Speed

Flywheels manufactured by SBC are made from low carbon, hot rolled steel that is highly resistant to warping and perfectly suited for the friction materials mated to them. Single mount CNC machining guarantees precise tolerances and perfect balance...

South Bend Clutch Stage 1 HD Clutch Kit for MK4 6 Speed

*Please Note: For use with OEM Dual Mass Flywheels* STAGE 1 HD: Heavy duty version of the stock O.E. clutch. The Pressure Plate has an increase clamp load for extended life. The disc is dual dampened for smooth engagement and increased transmission life...

South Bend Clutch Stage 2 Endurance Kit for MK4 6 Speed

STAGE 2 ENDURANCE: An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high...

South Bend Clutch Stage 2 Daily Kit for MK4 6 Speed

STAGE 2 DAILY: Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two...

034Motorsport Bullet Nose Stud Kits

The 034Motorsport Bullet Nose Stud Kit is designed to make wheel changes easier than ever. The Bullet Nose design allows your wheels and nuts to self-align, making installation faster, and easier. The Bullet Nose Stud Kit is available for all vehicles...

034Motorsport Wheel Nut Sets

The 034Motorsport Wheel Nuts are threaded in M14x1.5 and available in packs of 5 or 20 Ball Seat or Cone Seat nuts depending on your wheel design. These are manufactured from high tensile heat treated Grade 10.9 Chromoly Steel and are coated in Black...

034Motorsport Bullet Nose Stud & Nut Bundles

The 034Motorsport Bullet Nose Stud and Nut Bundles are designed to make wheel changes easier than ever. The bullet nose design allows the wheels and nuts to self-align, making installation faster, and easier. The Bullet Nose Stud and Nut Bundles are...