Solo-Werks L1 Lifting Coilover System for VW Atlas & Cross Sport

Lifting Range: Front 0 to +1.75" Rear 0 to +1.75" Features at a Glance: 3-Year Limited Warranty Warrants against Construction and Component Defects Heavy Gold Zinc Plated Housings Superb Corrosion Resistance, Salt Spray tested 500 Hours) Twin...

034Motorsport 17-19mm Adapter Socket Tool

The 034Motorsport 17-19mm Adapter Socket Tool is designed to allow those with 19mm 034Motorsport Stud and Nut sets installed to use their factory 17mm Wheel Bolt Wrench for tightening and loosening. The 034Motorsport 17-19mm is compatible with both...

BFI M14x1.5 Black Wheel Bolt for 5-Lug VW & Audi - Cone Seat

M14x1.5 cone seat wheel bolt for 5-lug VW & Audi models. SOLD INDIVIDUALLY SPECS: M14x1.5 thread diameter/pitch 60-degree cone seat 17mm hex head Black zinc plated APPLICATION: Fits 5-lug VW & Audi models with aftermarket wheels requiring cone...

BFI M14x1.5 Wheel Bolt for 5-Lug VW & Audi - Cone Seat

M14x1.5 cone seat wheel bolt for 5-lug VW & Audi models. SOLD INDIVIDUALLY SPECS: M14x1.5 thread diameter/pitch 60-degree cone seat 17mm hex head APPLICATION: Fits 5-lug VW & Audi models with aftermarket wheels requiring cone seat bolts SIZE...

BFI M14x1.5 Wheel Bolt for 5-Lug VW & Audi - Ball Seat

M14x1.5 ball seat wheel bolt for 5-lug VW & Audi models. SOLD INDIVIDUALLY SPECS: M14x1.5 thread diameter/pitch 13mm radius ball seat (factory VW/Audi) 17mm hex head Zinc plated APPLICATION: Fits 5-lug VW & Audi models with OE or aftermarket...

BFI VW Atlas Lift Kit - 1.5" Overall Lift

The factory ride height just did not cut it for us off the dealer lot. With the platform being so new, we set out to develop a simple yet effective solution to gaining more ground clearance and giving the Atlas a much more imposing stature. In addition,...

H&R Wheel Bolts M14 x 1.5 - Cone Seat

Need a set of conical wheel bolts for your aftermarket wheels? Need some longer hardware to pair with your wheel spacers? It's never a bad idea to have a few extras on hand!   H&R Wheel Bolts are solid Individually!   H&R Conical Seat...

ISC Suspension 370mm Length Coilover Covers (Pair)

When making a large purchase, what is the first thing that should come to mind? Maintenance and care should be what comes to mind and it is no different with coilovers. By maintaining and caring for your coilovers you can drastically reduce likelihood of...

ISC Suspension 300mm Length Coilover Covers (Pair)

When making a large purchase, what is the first thing that should come to mind? Maintenance and care should be what comes to mind and it is no different with coilovers. By maintaining and caring for your coilovers you can drastically reduce likelihood of...

Assembled by INS Strut Mount & Bearing Bundle for MQB

Are you getting ready to do a lowering spring or coilover install? Is your front suspension making noises while turning? The front strut mounts and bearings are notorious culprits for front suspension noise in the VW and Audi platforms. We recommend...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 32mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 32mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug caps...

RacingLine Wheel Studs - Individual

A single wheel stud for the RacingLine Stud and Nut conversion kit. If you already have the RacingLine Stud and Nut conversion, you can order these single replacement wheel studs. If you need to change between narrower and wider spacers, you can simply...

034Motorsport Bullet Nose Stud Kits

The 034Motorsport Bullet Nose Stud Kit is designed to make wheel changes easier than ever. The Bullet Nose design allows your wheels and nuts to self-align, making installation faster, and easier. The Bullet Nose Stud Kit is available for all vehicles...

034Motorsport Wheel Nut Sets

The 034Motorsport Wheel Nuts are threaded in M14x1.5 and available in packs of 5 or 20 Ball Seat or Cone Seat nuts depending on your wheel design. These are manufactured from high tensile heat treated Grade 10.9 Chromoly Steel and are coated in Black...

034Motorsport Bullet Nose Stud & Nut Bundles

The 034Motorsport Bullet Nose Stud and Nut Bundles are designed to make wheel changes easier than ever. The bullet nose design allows the wheels and nuts to self-align, making installation faster, and easier. The Bullet Nose Stud and Nut Bundles are...