034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Engine Torque Arm Insert for MQB

Under hard acceleration, your entire engine and transmission actually rotate due to compliance with the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...

Neuspeed Power Module for Gen 3 2.0T

*Does NOT fit 2020+ Model Audi's with the 3pin boost sensor* NEUSPEED Power Module is a device that easily allows the ablest person to upgrade the performance of their VAG 1.8/2.0 TSI (Gen3 engine) without reducing the reliability or integrity...

Neuspeed Boost Tap for Gen 3/4 1.8T & 2.0T

The NEUSPEED Boost Tap plugs directly into the intake manifold where the factory Manifold Absolute Pressure (MAP) sensor is located. Installing the Boost Tap is an easy and reliable way to tap into the 1.8 TSI and 2.0 TSI engine (Gen 2.5 and...

Neuspeed HI-FLO Turbo Inlet Pipe for 1.8T & 2.0T MQB

NEUSPEED Hi-Flo Turbo Inlet Pipe is a direct replacement for the original plastic inlet pipe, it improves the last restriction of airflow into the turbo. This Inlet Pipe will improve turbo response, increase airflow and less turbo lag. Flow Test: ...

APR Ignition Coils for MQB 1.8T, 2.0T & 2.5T

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from higher...

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...

Genuine VW / Audi Oil Filter for Gen 3 & Gen 4 1.8T & 2.0T

*Note: VW often stamps the oil filters with the part number "06L 115 466 C" and packages them as "06L 115 562 B"  The 562 B part number designates a kit (filter and o-ring.) This is still the correct oil filter for your Gen3 or Gen4 1.8T and 2.0T...

aFe MachForce-XP Catback Exhaust for Atlas 3.6L & 2.0T

3" - 2-1/2" 304 Stainless Steel Construction:This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. High-Flow 304 Stainless Steel Mufflers:This system features high-flow 304...

iAbed Billet Rear Main Seal Kit for VW/Audi TSI

*Fitment Notes: Will NOT fit vehicles with FSI engines. Will NOT fit MK2 Audi TT FWD models* Kit includes: iABED 06H Billet Rear Crankshaft Seal (1) Spring Loaded Rear Main Seal (8) M6 1.0 20mm SS Socket Cap Screws EA888.X Billet Rear Crankshaft Seal...

iAbed Billet Rear Main Seal Installation Tool for VW/Audi

This iAbed Industries installation tool is required for the installation of the iAbed Billet Rear Main Seal kit for VW/Audi vehicles.

IE Turbo Inlet Pipe for MQB

*Fitment Note: This inlet pipe may not work with some intakes. Please be sure to consult if you are unsure. Does not fit with the DV+ Diverter Valve or Diverter Valve spacers.* TURBO INLET PIPE FEATURES Greatly improves air-flow to turbocharger Constant...

034Motorsport Billet Aluminum Rear Main Seal Kit for Late 1.8T & 2.0T

*Fitment Notes: Will NOT fit 2.0 FSI engines in early model MK5, B6, etc.* 034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone stamped steel factory Rear Main Seal on your 2.0T Volkswagen. This Billet Rear Main...

034Motorsport VW & Audi Direct Injection Head Port Cleaning Tool

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of...

034Motorsport Turbo Inlet Pipe for 1.8T & 2.0T MQB

The 034Motorsport Turbo Inlet Pipe for the 1.8T & 2.0T MQB, Audi 8S-TT/TTS 8V-A3/S3, and the VW MkVII-Golf/GTI/R A7-Jetta/GLI MQB-Tiguan, is an essential upgrade to optimize power by eliminating a critical flow restriction in the intake tract. The...