CJM Industries Center Vent Panel for MK7/7.5 GTI & Golf R

*You are buying a panel only - all accessories are sold separately* The CJM Industries central dash panel is designed to fit left hand drive MK7 GTI's & R's. It replaces the center air vent on the drivers side above the head unit with a panel to...

CJM Industries Center Vent Cobb Accessport Mount for MK7/7.5 GTI & Golf R

*You are buying a mounting arm and vent panel only* Made in USA. The CJM Industries Cobb™ mount is designed to fit left or right hand drive MK7 GTI's & R's. It replaces the vent slats in the left center AC vent with a panel and...

CJM Industries V3 Single Gauge Pod for MK7/7.5 GTI & Golf R (60mm)

*You are buying a pod only - gauges are sold separately* The CJM Industries 60mm pod is designed to fit left or right hand drive MK7 GTI's & R's. It replaces the factory defrost dash vent on the drivers side with a pod to mount (1) -...

CJM Industries Steering Column Gauge Pod for MK7/7.5 Golf, GTI & Golf R (52mm)

*This is for a pod only, no gauges included* This pod comes with 3M VHB tape to adhere it to the top of your steering column.  Installing this pod will limit the range of motion of your steering wheel. If you typically position the wheel...

CJM Industries Dual Left Center Vent Gauge Pod for MK7/7.5 GTI & Golf R

*You are buying a pod only - gauges are sold separately*   The CJM Industries dual central dash vent pod is designed to fit left hand drive MK7 GTI's & R's. It replaces the center air vent on the drivers side with a panel to mount (2)...

CJM Industries Single Left Center Vent Gauge Pod for MK7/7.5 GTI & Golf R

*You are buying a pod only - gauges are sold separately* The CJM Industries central dash vent pod is designed to fit left hand drive MK7 GTI's & R's. It replaces the center air vent on the drivers side with a panel to mount (1) 2 1/16" (52mm)...

CJM Industries Rear Headrest Delete Plugs for MK7 & MK7.5

A simple solution to cover up the open hole in the top of the rear seat when the headrests are removed. These plugs interface with the OEM mechanism to retain the delete plug with tension. These are held firmly in place and will not create...

CJM Industries Coin Tray Pod for MK7 & MK7.5

*This is for a pod only, no gauges included* Looking to install gauges in your MK7 but want to keep your interior clean? This pod might be for you! This fits in the coin tray on the driver side to install one or two 52mm gauges. Made of 3D printed...

CJM Industries Coin Tray Air Lift 3P/3H Controller Mount for MK7 & MK7.5

*This is for the controller mount only! This does NOT include a compartment or a controller!* Made of 3D printed ABS composite, textured front surface.  Requires drilling a hole in the back of the coin tray to install wiring. Coin tray still...

CJM Industries Card Holder Cover for MK7/7.5 Golf & GTI

Tired of cleaning the card slots in the Golf/Gti console? Just cover it up! Made of 3D printed ABS composite, textured front surface (not a perfect match to OEM texture, see pictures). It will not fit R models that already have a sliding door...

CJM Industries Cup Holder Delete Panel for MK7/7.5 Golf & GTI

Tired of looking at that nasty cup holder you've never cleaned? Just cover it up! Made of 3D printed ABS composite, textured front surface. The panel can only be installed with the pull tab in the back. It will not fit R models that already have a...

CJM Industries V2 DSG Paddle Shifter Pins for MK7 & MK7.5

Replace your worn or lost pins with these CJM Industries designed pins. Made of glass reinforced Nylon. Designed to fit MK7/7.5 paddles.  3 year warranty for original owner. Made in USA.  Select "Single" for a single pin. Select "Set of...

CJM Industries Defrost Vent Cobb Accessport Mount for MK7/7.5 GTI & Golf R

*You are buying a mounting arm and vent base only* The CJM Industries Cobb™ mount is designed to fit left or right hand drive MK7 GTI's & R's. It replaces the factory defrost dash vent on the drivers side with a mount to clamp the...

CJM Industries V3 Dual Gauge Pod for MK7/7.5 GTI & Golf R (52mm)

*You are buying a pod only - gauges are sold separately* The CJM Industries 52mm pod is designed to fit left hand drive MK7 GTI's & R's. It replaces the factory defrost dash vent on the drivers side with a pod to mount (2) 2 1/16" (52mm) gauges...

CJM Industries XL Deep Single & Double Gauge Pod for MK7/7.5 GTI & Golf R (52mm)

*You are buying a pod only - gauges are sold separately* The CJM Industries XL 70 mm deep 52mm diameter pod is designed to fit left or right hand drive MK7 GTI's & R's. This pod is a deeper version of our V3 pod to accommodate mechanical...