Verus Engineering Rear Diffuser Panel Kit for Porsche 718 GT4

The Verus Engineering Rear Diffuser Panel kit fills in the void where the factory diffuser lacks. The factory 718 GT4 Rear Diffuser performs well, but once you swap the suitcase style mufflers out with an aftermarket exhaust, the bumper becomes a...

Verus Engineering Gas Cap Cover for Porsche 992 & 718

Cover up the lackluster plastic gas cap that comes from the factory with our cap machined from solid aluminum. These units are machined, anodized, and then CNC machine engraved with a Porsche silhouette of your choice in the USA. The caps are...

Verus Engineering Front Splitter Kit for Porsche 718 GT4

Front splitters are very effective at producing front end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. We then properly sized the splitter based on the rear...

Verus Engineering Dual Element Dive Plane Kit for Porsche 718 GT4

The Dive Planes for the Porsche 718 GT4 were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal. They produce a safe aero balance with or without...

Verus Engineering UCW Rear Wing Kit for Porsche 981 & 718 Cayman GT4

The UCW Rear Wing is a great addition to your Porsche 981/718 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times.  Designed to work on the factory or aftermarket uprights and handle the...

Verus Engineering Rear Wing Kit for Porsche 981 & 718 Cayman GT4

Dramatically improve rear-end grip at speed with our 300mm chord, swan neck wing.  The wing and full aero kit were designed in CFD to greatly improve the vehicle's performance around the track. The wing alone has the ability to dramatically reduce...

SPL Parts Rear Lower Control Arm Kit for 982/718 Boxster & Cayman

*Fitment Note: Does NOT fit GT4* SPL Parts Billet Rear Lower Control Arm (RLCA) and Trailing Links provide track width, camber, caster, roll center and anti-squat adjustment.  This is the ultimate tool for setting up the handling of your Porsche...

SPL Parts Adjustable Front Caster Arms for Porsche 991, 981 & 982/718

SPL Front Caster/Thrust/Tension rods provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster.  Any changes to front camber will change...

SPL Parts Front Sway Bar Endlinks for Porsche 991, 981 & 982/718

SPL Front Endlinks (droplinks) for the Porsche 991 era 911 and 981/982/718 Boxster and Cayman chassis feature massive 2 piece Teflon lined FK 1/2" Bearings to provide a long service life with lightweight 6061-T6 Aluminum center turnbuckles.  Custom...

SPL Parts Rear Toe Arms for 981 & 982/718 Boxster & Cayman

Porsche Rear Toe Arms (RTA) increase stability and response by eliminating bushing deflection and offer a wide range of toe and bump steer adjustment.  When you lower your 981, the factory links create too much toe-in that cannot be adjusted out...

SPL Parts Front Lower Control Arm Kit for 981/982 Boxster & Cayman & 991 Carrera & Turbo

SPL Parts Titanium Series Front Lower Control Arm (FLCA) kit provides track width, camber, caster, roll center, and anti dive adjustment.  This is the ultimate tool for setting up the handling of your Porsche chassis for racing, track, or street use...

SPL Parts Adjustment Wrench

Our black anodized CNC machined billet aluminum wrench is a useful addition to your racing tool box.  Designed for use with our hybrid adjusters and hex links/turnbuckles, this small wrench works in tight spaces and will will not damage the finish...

SPL Parts Sway Bar Endlinks for Porsche 996, 997, 986, 987, 981 & 982/718

Porsche Front Endlinks (droplinks) for the Porsche 996 and 997 chassis also fit the front and rear of the 986 and 987 Boxster and Cayman as well as the rear of the 981/982/718 Boxster and Cayman. They feature massive 2 piece Teflon lined FK 1/2" Bearings...

SPL Parts Bumpsteer Adjustable Tie Rod Ends for Porsche 996, 997, 991, 986, 987, 981 & 982/718

*Please Note: These will NOT fit the 991 GT3 & Cayman GT4* Porsche  Front Tie Rod Ends (TRE) allow the tie rod end pivot to be relocated, which will correct bump steer resulting from modified caster or lower arm geometry, thus reducing lap times...

APR Ignition Coils for 991.2/992 3.0T/3.7T & 718 2.0T/2.5T

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. It's commonplace replacement of factory ignition coils with those taken from the...