RacingLine Oil Management System Drain Kit for MQB

WHY FIT? The RacingLine Oil Management Kit needs regular emptying to remove the nasty oil vapours and moisture that accumulate in the catch can. Our new Drain Kit is a really simple addition that makes emptying your Catch Can a quick, clean and...

iSweep Billet Aluminum Oil Pan for EA888 1.8T & 2.0T

*Will NOT fit FSI 2.0T engines*   The iSWEEP EA888 aluminum oil pan is a billet engine oil pan made from 6061-T6 aluminum by CNC machining. The design places cooling fins on the entire lower surface of the oil pan to demonstrate the cooling...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Power Pulley Kit for Gen 3 1.8T & 2.0T

NEUSPEED since 1975, nobody comes close to our record of industry-first aftermarket products for VW/Audi vehicles; we set the industry standards for design, innovation, quality of materials, fit, finish and attention to detail. NEUSPEED ...

Neuspeed Power Module for Gen 3 2.0T

*Does NOT fit 2020+ Model Audi's with the 3pin boost sensor* NEUSPEED Power Module is a device that easily allows the ablest person to upgrade the performance of their VAG 1.8/2.0 TSI (Gen3 engine) without reducing the reliability or integrity...

Neuspeed Boost Tap for Gen 3/4 1.8T & 2.0T

The NEUSPEED Boost Tap plugs directly into the intake manifold where the factory Manifold Absolute Pressure (MAP) sensor is located. Installing the Boost Tap is an easy and reliable way to tap into the 1.8 TSI and 2.0 TSI engine (Gen 2.5 and...

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...

034Motorsport Motor Mount Pair Hardware for MQB

Complete factory motor mount and transmission mount bolt kit for the Audi 8V A3/S3, Audi 8S TT/TTS, and Volkswagen MkVII Golf/GTI/R. WHAT'S INCLUDED: N91029602 - Bolt, Double Hex Head, M10x55/M6x12 - Qty 1 N10706901 - Bolt, Hex Head, M10x55 - Qty 1...

iAbed Billet Rear Main Seal Kit for VW/Audi TSI

*Fitment Notes: Will NOT fit vehicles with FSI engines. Will NOT fit MK2 Audi TT FWD models* Kit includes: iABED 06H Billet Rear Crankshaft Seal (1) Spring Loaded Rear Main Seal (8) M6 1.0 20mm SS Socket Cap Screws EA888.X Billet Rear Crankshaft Seal...

iAbed Billet Rear Main Seal Installation Tool for VW/Audi

This iAbed Industries installation tool is required for the installation of the iAbed Billet Rear Main Seal kit for VW/Audi vehicles.

034Motorsport Billet Aluminum Rear Main Seal Kit for Late 1.8T & 2.0T

*Fitment Notes: Will NOT fit 2.0 FSI engines in early model MK5, B6, etc.* 034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone stamped steel factory Rear Main Seal on your 2.0T Volkswagen. This Billet Rear Main...

Fluidampr Crank Pulley for 1.8T & 2.0T TSI

*Please Note: Will NOT fit vehicles with FSI engines* Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful...

034Motorsport VW & Audi Direct Injection Head Port Cleaning Tool

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of...

RacingLine Oil Management System for 2.0T MQB

*Fitment notes - 2019 GTI may not fit the catch can due to the evap canister on some vehicles. Some MK7 Golf R and Audi S3 models had the windshield washer reservior mounted on the passenger side, which will require a relocation kit to install the catch...

Autotech Fuel Pump Tool for EA888 Gen 3

Gen 3 TFSI fuel pump dissasembly tool. This tool is used to unscrew the fuel pump housing so that new internals may be installed. Used with 1 1/16" socket.