KW V4 Clubsport Coilovers for Audi 8S & 8Y RS3

KW V4 Clubsport: 3-way damping adjustable coiloversThe technology of the 24-hour race winnerUsing the Nordschleife as it's testing grounds and the 7-post rig, KW developed it's KW V3 Clubsport coilover kit. Wheel loads, vehicle weight and chassis...

KW V3 Coilovers for Audi 8S (w/ Magnetic Ride)

The new KW Variant 3 Coilover System is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3...

KW V3 Coilovers for Audi 8S (w/o Magnetic Ride)

The new KW Variant 3 Coilover System is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3...

APR Roll-Control Front Sway Bar for AWD MQB & MQB Evo

*Please Note: Designed for All wheel drive (AWD) vehicles.* APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without greatly impacting comfort. Drivers who enjoy a more spirited...

APR Roll-Control Rear Sway Bar for AWD MQB & MQB Evo (Non RS Haldex)

*Please Note: Designed for all wheel drive (AWD) vehicles with the standard haldex unit (Non-RS/22+ R/25+ S3).*   APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without...

Neuspeed Billet biAXIS Front Upper Strut Mounts for MQB & MQB Evo

Introducing the NEUSPEED Billet biAXIS Upper Strut Mounts, meticulously engineered for Audi and Volkswagen MQB/MQBevo chassis vehicles. They enhance vehicle handling dynamics by providing fine-tuned control over two-axis geometry...

KW EDC Delete Kit for Audi 8V & 8S

KW EDC Cancellation Kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically regulated dampers. KW is the only manufacturer that offers the solutions whereby the serial damper regulation is shut...

APR Roll-Control Coilover System for MQB & MQB Evo

*Fitment Note: Does NOT fit vehicles with torsion beam rear axle* The APR Roll-Control Coilover System offers a wide range of adjustment to fully customize your vehicle's suspension setup! The system comes complete with front and rear struts and dampers,...

Whiteline Front Lower Control Arms for MQB (Max-C)

IMPORTANT NOTES - Complete pair of Alloy arms - adds 0.5 to 3.0 deg positive caster and -0.25deg camber Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press...

034Motorsport Strut Mount Bearing for MQB & MQB Evo

Make the most out of your new Density Line Strut Mounts and replace the upper strut bearing while you're in there. These front bearings see a lot of load from the suspension, and can wear and become noisy over time. This factory replacement strut bearing...

ST XTA Coilovers for 8S TT & TTS

*Vehicles equipped with EDC (electronic damping) will lose functionality and have error codes without an EDC delete kit* For those who demand performance comes the ST XTA coilover. The full driving behavior of your car can be altered using adjustable KW...

ST X Coilovers for 8S TT & TTS

*Vehicles equipped with EDC (electronic damping) will lose functionality and have error codes without an EDC delete kit* Ready to ditch the wheel gap? ST coilovers feature a continuously threaded construction for height adjustment from moderate to...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...