EMD Auto Extended Wheel Bolt M14 x 1.5 - 32mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 32mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug caps...

RacingLine Wheel Studs - Individual

A single wheel stud for the RacingLine Stud and Nut conversion kit. If you already have the RacingLine Stud and Nut conversion, you can order these single replacement wheel studs. If you need to change between narrower and wider spacers, you can simply...

JXB Performance Might-As-Well-Be-Gated Kit for Audi B8/B8.5

This is a combo kit that includes: Billet B8/8.5 Shifter Mounting Plate Billet B8/8.5 Linkage Reinforcement Kit This combo all but eliminates shifter slop and flex under load.   Add the B8/8.5 Short Shift Clamp for $69.99 to complete the...

JXB Performance Billet Rear Spring Perches for Audi B8/B8.5

The B8 Billet Rear Spring Perch Pair replaces the OEM rubber top perches. Rubber acts as a spring with a mystery spring rate, leading to unwanted oscillations that reduce the ability of your suspension to keep the wheels planted firmly on the pavement...

JXB Performance Spherical Front Upper Strut Mounts for Audi B8/B8.5

Sold as a pair. The Problem The strut mounts are responsible for being the primary reaction surface for the shock absorber. Rubber strut mounts, in an effort to shiefd the driver from the road, are soft and flexible. When the shock pushes against...

JXB Performance Extended Slave Cylinder for Audi B8/B8.5

THE solution to the B8/8.5 Push Clutch to Start issue.   We highly recommend the use of a pressure bleeder for installation.   FITMENT B8/8.5 A4/S4/RS4/A5/S5/RS5   INSTALLATION   WHY IT WORKS   WHAT IS THE "PUSH TO...

JXB Performance Short Shift Clamp for Audi B8/B8.5

A short throw shifter without having to buy a whole shifter. The JXB Short Shift Clamp gives you a substantial reduction in the length of the throw on your shifts at a fraction of the price of other short throw shifter kits. A typical short throw...

JXB Performance Billet Shifter Mounting Plate for Audi B8/B8.5

Take your 1-2 shift to the next level. Prevents 2nd gear lockout.   WHY EVERY SHIFTER NEEDS THIS The factory mounting plate that holds the shifter to the body of the car is made of flimsy plastic with a layer of sound-deadening foam...

JXB Performance Billet Linkage Reinforcement Kit for Audi B8/B8.5

Transform your sloppy OEM shift linkage into a precision instrument for perfect shifts.   WHY WE MADE THIS PRODUCT Everybody knows the stock linkage sucks. It doesn’t perform well, it sucks to swap out, and it’s expensive to...

JXB Performance Ultimate Short Throw Shifter Kit for Audi B8/B8.5

The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts. Includes: Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout) Billet B8/8.5 Short Shift...

JXB Performance Driveshaft Center Support Bearing Carrier Upgrade for Audi B8 A4/A5/S4/S5/RS5 With 0B5/0B6/0BK DSG/Auto

Holds the driveshaft where it should be. Isolation dampers minimize vibrations. THE PROBLEM The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its...

JXB Performance Driveshaft Center Support Bearing Carrier Upgrade for Audi B8 A4/A5/S4/S5/RS5 With 6MT

Holds the driveshaft where it should be. Isolation dampers minimize vibrations. THE PROBLEM The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its...

APR Ball Seat Lug Bolts - 47mm (Set of 10)

APR's Wheel Spacers physically move the wheel further away from the hub. In doing so, they give your wheels the desired offset needed to create the stance or look you desire, or clearance necessary to clear brake calipers. When using wheel spacers,...

034Motorsport Bullet Nose Stud Kits

The 034Motorsport Bullet Nose Stud Kit is designed to make wheel changes easier than ever. The Bullet Nose design allows your wheels and nuts to self-align, making installation faster, and easier. The Bullet Nose Stud Kit is available for all vehicles...

034Motorsport Wheel Nut Sets

The 034Motorsport Wheel Nuts are threaded in M14x1.5 and available in packs of 5 or 20 Ball Seat or Cone Seat nuts depending on your wheel design. These are manufactured from high tensile heat treated Grade 10.9 Chromoly Steel and are coated in Black...