RacingLine UnderBody Tunnel Braces for MQB

*Fitment Note: Center chassis brace does NOT fit AWD models - FWD ONLY!* BILLET UNDERBODY TUNNEL BRACES Want to sharpen up your MQB handling responses?These two intricately designed MQB Billet Underbody Tunnel Braces mount under the body to help fight...

Solo-Werks S1 Coilovers for MK7 GTI, GLI, Golf R, Alltrack & Audi 8V

*Fitment note - Vehicles equipped with DCC will lose functionality and throw error codes without a DCC delete kit. Does NOT fit Taos FWD models - 4Motion ONLY* Solo Werks S1 Coilover System - Premium Entry Level Coilover Suspension MK VII 15+ 55mm (W/...

EMD Auto 5x112 20mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto 5x112 17.5mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto 5x112 15mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto 5x112 10mm Spacer Pair with Bolts - 57.1mm Centerbore

Our wheel spacers are manufactured out of high quality 6061-T6 aluminum, which is black anodized for corrosion resistance. We also machine slots into the back of each spacer, for ease of removal (gone are the days of chiseling the spacer to get it off...

EMD Auto Wheel Spacer Flush Kit for 8V S3

For those seeking a more aggressive stance on the stock 19" wheels, our flush spacer kit will help you get there!   Included in the kit are:  - (2) 10mm Front Wheel Spacers  - (2) 17.5mm Rear Wheel Spacers  - (20) Extended Ball Seat...

eMMOTION Lowering Spring Kit for 8V & 8Y A3 & S3

Are you looking to lower your 8V A3 or S3, but are concerned with diminished ride quality? Designed with the daily driver in mind, eMMOTION lowering springs by Emmanuele Design will provide the improved aesthetics of a lowered vehicle, without...

eMMOTION Rear Sway Bar Upgrade for MQB AWD

For those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the Volkswagen Golf R (MK7 & MK7.5). Designed around a package with our lowering spring kit, the rear sway bar upgrade will...

EMD Auto Adjustable Rear Sway Bar End Link Set for MQB (w/ Dust Boots)

Higher quality end links are a must when upgrading to a stiffer sway bar!   Our end links serve two primary purposes: - Steel body will not flex or break under the load of a stiff sway bar - Adjustable length allows for removal of pre-load on...

EMD Auto MQB Rear Suspension "Reverse Rake" Adapter Pad

If your MQB lowering springs (or even stock springs) exhibit reverse rake, this simple solution is for you! Machined from tough ABS plastic, this piece sits between the OEM rubber pad and the body. When installed, this pad will raise the rear fender by...

034Motorsport Wheel Nut M14 x 1.5 - Ball Seat (Set of 4)

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius. Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat...

034Motorsport Wheel Nut M14 x 1.5 - Cone Seat (Set of 4)

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels. Open ended so a stud can thread fully through. Sold in sets of 4 nuts!  A 4-bolt car will need a quantity of 4, a 5-bolt...

034Motorsport Wheel Stud M14 x 1.5 (Set of 4)

M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.  2.5" which would accomodate a spacer up to 15mm safely Fits all Audi applications with M14 threaded hubs. For 2.5" stud, lower threads are .4" (10mm) long, upper threads are 1.7"...

034Motorsport Wheel Stud & Nut Kit M14 x 1.5 - Cone Seat

Priced per set of 4 studs and 4 nuts! A 4-bolt car will need a quanitity of 4! A 5-bolt car will need a quantity 5! Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with...