BFI Engine Mount Inserts - Stage 1

These inserts give you the option to upgrade or downgrade as you see fit without having to purchase a completely new mount. Both upper and lower inserts are included. These inserts will work with all MK4, MK5, MK6, MQB, and Audi 8J, 8S, 8P, and...

BFI Engine Mount for MQB - Stage 2

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Engine Mount for MQB - Stage 1

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Engine Mount Kit for 2.0T MQB - Stage 2

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Engine Mount Kit for 2.0T MQB - Stage 1

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Torque Arm Insert for MQB - Stage 2 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 2 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 1 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

BFI Torque Arm Insert for MQB - Stage 1 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

IE 5 Bar MAP Sensor Kit for MK7 & 8V MQB Gen 3

MQB High Boost Sensor Kit The IE 5 Bar Map Sensor Kit is designed to replace the factory 3 bar MAP (manifold absolute pressure) and PUT (pressure up throttle) sensors found on the VW & Audi MK7/8V GTI, Golf R, GLI, A3, and S3 EA888 Gen 3 engines...

034Motorsport High Pressure Fuel Pump Upgrade for EA888 Gen 3 2.0T

The 034Motorsport High Pressure Fuel Pump Upgrade is designed to conveniently replace the factory high pressure fuel pump found in the 2.0T EA888 Gen 3 engine found in the MK7/7.5 Volkswagen GTI/GLI/R, 8V/8V.5 Audi A3/S3, and 8S Audi TT/TTS.By replacing...

EQT Standard Brushless LPFP for MQB & MQB Evo

ECU tuning is required to utilize this pump STANDARD LPFP The EQT Brushless Low Pressure Fuel Pump (LPFP) is a perfect upgrade for your EA888.3 powered vehicle and is available in both FWD and AWD configurations. This kit is a...

EQT 5 Bar TMAP/PUT Sensor Package for EA888.3

Whenever upgrading your turbocharger to a larger than stock unit, and looking to produce more than 29Psi of boost pressure (Manifold Relative Pressure / Boost) you need to upgrade your TMAP and PUT Sensor in order to allow the ECU proper visibility and...

EQT 5 Bar PUT Sensor for EA888.3

The perfect companion for an EQT 5 Bar TMAP is here with the new EQT 5 Bar PUT Sensor! Now with both sensors squared tuning and installation is even easier. Both the EQT TMAP and PUT sensor utilize the same scaling and you never have to worry about...

EQT 5 Bar TMAP Sensor for EA888.3

After months of prototyping and testing, we are pleased to finally announce our in-house offering of a TRULY plug-and-play solution for a 5bar TMAP sensor! Not only does this sensor contain the factory style temperature compensated circuitry, it...