RacingLine Stage 3 2-Piece Rear Brake Rotor Upgrade for MQB & MQB Evo

*Please Note: Cars with smaller, 300x12mm non ventilated rear rotors will need OE caliper upgrade to the larger size before fitment of these discs* Our Stage 3 Two-Piece Performance Rear Disc/Rotor upgrade is the perfect upgrade to match the...

034Motorsport Strut Mount Bearing for MQB & MQB Evo

Make the most out of your new Density Line Strut Mounts and replace the upper strut bearing while you're in there. These front bearings see a lot of load from the suspension, and can wear and become noisy over time. This factory replacement strut bearing...

034Motorsport Billet Aluminum DSG Breather Catch Can Kit for Audi 8V/8V.5 A3 & S3

The 034Motorsport Billet Aluminum DSG Breather Catch Can for the Audi 8V/8V.5 A3/S3 replaces the tiny OE plastic vent and prevents transmission fluid from being forced out and splashing around the engine bay. Any transmission fluid that is collected in...

Neuspeed Gen 5 Haldex Controller for MQB

Introducing the new performance-enhancing performance controller for 5th general Haldex systems. This module is designed for drivers who demand more from their vehicles. This innovative system increases torque transmission during active...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 33mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...