BFI Engine Mount Kit for 8V RS3 & TTRS - Stage 1

NOTE: WE ONLY RECOMMEND STAGE 1 MOUNTS FOR STOCK OR LIGHTLY MODDED VEHICLES. IF YOU ARE RUNNING HIGHER POWER LEVELS WE RECOMMEND GOING WITH STAGE 2 MOUNTS. KEEP IT PLANTED.  Your 2.5l 5 cylinder turbo powered Audi is capable of amazing things...

BFI Torque Arm Insert for MQB - Stage 2 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 2 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 1 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

BFI Torque Arm Insert for MQB - Stage 1 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

JXB Performance Driveshaft Center Support Bearing Carrier Upgrade for MQB AWD

Holds the driveshaft where it should be. Isolation dampers minimize vibrations. THE PROBLEM The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its...

034Motorsport Haldex Magnetic Drain Plug Kit for 4Motion & Quattro MK5, 8J, 8P & Up

PRODUCT DESCRIPTION: The 034Motorsport Haldex Magnetic Drain Plug Kit for Audi 8J/8P/8V/8V.5/8S/8Y Quattro Vehicles and Volkswagen Mk5/Mk6/Mk7/Mk7.5/Mk8 4Motion Vehicles is designed to replace the factory Haldex drain plug and fill plug. CNC-machined...

034Motorsport Rear Differential Magnetic Drain Plug Kit for 4Motion/Quattro

PRODUCT DESCRIPTION: The 034Motorsport Rear Differential Magnetic Drain Plug Kit for Audi 8J/8P/8V/8V.5/8S/8Y Quattro Vehicles and VW Mk5/Mk6/Mk7/Mk7.5/Mk8 4Motion Vehicles is designed to replace the factory Rear Differential drain plug and fill plug...

APR Transmission Catch Can and Breather System for DQ500

The Ultimate DQ500 DSG / S Tronic Transmission Catch Can and Breather System is here! The factory transmission features a plastic breather system that allows for transmission fluid expansion and removal of gases. Unfortunately, this system easily becomes...

APR Billet Pendulum Mount for DQ500 & 8 Speed AQ450

The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power...

APR Stainless Steel Dogbone Mount Insert for MQB

*Please visually check the application guide for proper fitment as there are multiple subframe options. Always replace your factory 1-time use subframe bolt!* The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which...

034Motorsport Driveshaft Removal Tool for 8V RS3 & 8S TTRS

PRODUCT DESCRIPTION: The 034Motorsport Driveshaft Removal Tool was designed to safely remove the driveshaft on the Audi 8V/8V.5 RS3 or 8S TTRS. This simple-to-use tool can be used during driveshaft replacement, during a downpipe install, or any job that...

034Motorsport Billet Aluminum DSG Oil Tube Kit for DQ500

*Fitment Note: ONLY fits 2014-2015 Audi R8 with 7 Speed DSG transmissions* PRODUCT DESCRIPTION: The 034Motorsport Billet Aluminum Oil Tube Kit for the DQ500 DSG Transmission is designed to replace the factory failure-prone plastic oil tubes. When...

Genuine VW / Audi Dogbone Puck Bolt for MQB

N91201001: M14 x 1.5 x 50mm We are sourcing the hardware directly from a local VW dealership, so you're guaranteed a genuine part!

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.