VIAIR 444C Air Compressor - Chrome

VIAIR 444C Compressor specs: Available in Chrome or Black finishes CFM: 1.76 Max Pressure: 200 psi Max Amp Draw: 20 Duty Cycle: 100% Fill Rate (5 gallons): 0-200psi – 5:30 min; 165-200psi – 1:35 min

Air Lift Performance 5 Gallon Aluminum Air Tank

Air Lift Performance 5 Gallon Aluminum Air Tank Four 3/8" Face Ports One 1/4" Drain Port 200psi Maximum Operating Pressure 36" Length x 6" Depth x 7.5" Height Available in Polished Finish - No extra cost!

Air Lift Performance 4 Gallon Aluminum Air Tank

Air Lift Performance 4 Gallon Aluminum Air Tank Available in 5 Port and 7 Port configurations Available in Polished Finish - No extra cost! 5 Port Features Two 1/4" End Ports Two 3/8" End Ports One 1/4" Drain Port 200psi Maximum Operating Pressure 30"...

Air Lift Performance 2.5 Gallon Aluminum Air Tank

Air Lift Performance 2.5 Gallon Aluminum Air Tank Four 1/4" Face Ports One 1/4" Drain Port 200psi Maximum Working Pressure 20" Length x 6" Depth x 7.5" Height Available in Polished Finish - No extra cost!

034Motorsport Adjustable Solid Rear Sway Bar Upgrade for B8 Q5/SQ5 & C7

034Motorsport is proud to offer the ultimate rear sway bar upgrade for the B8/B8.5 Audi Q5/SQ5 & C7/C7.5 A6/S6/RS6, A7/S7/RS7! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, 25.4mm thick spring steel for...

034Motorsport Dynamic+ Lowering Springs for B8 Q5 & SQ5

Dynamic+ Lowering Springs were engineered and tested in-house at 034Motorsport to deliver superb ride quality and optimal handling performance. Designed as a true no-compromise solution, Dynamic+ Lowering Springs provide an aggressive yet functional...

034Motorsport Heavy Duty Tie Rod End Pair for Audi B8

This Heavy-Duty Tie Rod End Pair fits B8/B8.5 Audi A4/S4, A5/S5/RS5 & Q5/SQ5 models, and includes drop-in replacements for the factory outer tie rods. 034Motorsport Tie Rod Ends feature all-metal construction with a heavy-duty ball and socket...

034Motorsport Density Line Front Strut Mount for Audi B8

*Please Note: These mounts are available in Track Density only, and are priced individually. One vehicle will require 2 strut mounts. The rubber outer shell and inner puck is included.* We are VERY excited to be announcing the release of our...

034Motorsport Density Line Adjustable Rear Toe Link for Audi B8

Replace your fixed, stamped steel factory rear toe links on your B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, or Q5/SQ5 with this all-new performance engineered adjustable set from 034Motorsport! 034Motorsport's B8/B8.5 Audi Density Line Adjustable Rear Toe Links...

034Motorsport Density Line Track Spec Adjustable Upper Control Arm Kit for Audi B8 & C7

Fully adjustable upper control arms for the B8 Audi A4/S4/A5/S5/Q5 are available in both Camber Correcting and Track Spec varieties.  Camber Correcting: Perfect for those who have lowered their car from OEM ride height and are looking to...

034Motorsport Density Line Camber Correcting Adjustable Upper Control Arm Kit for Audi B8 & C7

Fully adjustable upper control arms for the B8 Audi A4/S4/A5/S5/Q5 are available in both Camber Correcting and Track Spec varieties.  Camber Correcting: Perfect for those who have lowered their car from OEM ride height and are looking to...

034Motorsport Density Line Upper Control Arm Kit for Audi B8 & C7

The factory front upper control arms are an integral part of the B8/B8.5 Audi A4/S4 & A5/S5/RS5 suspension, but can start wearing out as early as 40,000 miles - especially on enthusiast-owned vehicles which are driven hard on the street or track...

034Motorsport Active Motor Mount Resistor Bypass for B6/B7 Audi S4 V8, Tiptronic B7 Audi A4, B8 Audi A4/S4/A5/S5/Q5/SQ5, C5 S6

*Note: One required per mount.* These plug-in resistor bypasses can be used to remove the CEL caused by replacing the failure-prone factory "active" mounts with 034Motorsport Density Line & Motorsport Spec Engine Mounts. FITMENT: 2005 - 2008 Audi A4...

034Motorsport Tracksport Motor Mount Pair for Audi B8/B8.5 & C7/C7.5 3.0T

Billet Aluminum Motorsport-Spec Engine Mounts have arrived for B8/B8.5 Audi A4/S4, A5/S5, and Q5/SQ5 models equipped with the 2.0 TFSI, 3.0 TFSI, or 3.2L FSI engine! Motorsport Engine Mounts are manufactured from billet aluminum and feature Density Line...

034Motorsport Street/Track Density Motor Mount for B8 & C7 A6/A7

*Please Note: Sold Individually (One Vehicle Requires 2 Mounts) Note: This mount has two different applications that is based on engine size (Track for 4-cyl and Street for 6-cyl). Please see the Fitment Guide tab below for application information.*...