APR Dual Pulley Kit for Audi 3.0T (Press-On Style)

*Please Note: Specific software is required to maximize output with this product. Use part number MS100025 to remove the factory supercharger drive pulley.* APR's Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63...

APR Supercharger Drive Pulley for Audi 3.0T (Bolt-On Style)

*Please Note: Specific software is required to maximize output with this product. This system is only for use with bolted on pulleys. For pressed on pulleys, use part number MS100135. A new belt is required. Use part number RS100001 with a factory crank...

APR CPS Radiator Fit Kit for B8 S4 & S5 3.0T

This fit kit is required to fit the APR CPS system to C7 (pre facelift) and B8 (Pre Facelift) vehicles. Features: Adapts the system to the B8 chassis All hoses and fittings included for a painless install   This part is legal for sale or use on...

APR Supercharger Drive Pulley for Audi 3.0T (Press-On Style)

*Please Note: Specific software is required to maximize output with this product. A new belt is required. Use part number RS100003 with a factory supercharger drive pulley and part number RS100002 with an APR supercharger drive pulley* APR's Supercharger...

APR Supercharger Crank Pulley for Audi 3.0T

*Please Note: Specific software is required to maximize output with this product. A new belt is required. Use part number RS100003 with a factory supercharger drive pulley and part number RS100002 with an APR supercharger drive pulley.* APR's...

APR Ultracharger Throttle Body Upgrade for C7 A6 & A7 3.0T

*Please Note: Specific software is required to use this system. Software is included. Software compatibility must be checked before purchase. This system also requires other hardware to function properly, including: Supercharger Drive Pulley,...

APR CPS Radiator for B8 & C7 3.0T & 4.0T

*Please Note: The B8 S4/S5 and some C7 A6/A7 require the CPS Fit Kit (MS100136). The fit kit is required when the cooler has an inlet and outlet on opposite sides. Furthermore, some B8 S4/S5 vehicles with Audi Drive Select (ADS) coolers will require...

APR Supercharger Pulley Install Kit for 3.0T

The factory Gen 1 supercharger drive pulley is pressed on to the supercharger's input shaft. It's not possible to remove the factory pulley without damage, or damaging the supercharger itself unless special care and attention is taken.   The APR...

BMC Complete Filter Washing Kit

This BMC Filter Cleaning Kit Includes: 500ml Bottle of Detergent 250ml Bottle of Filter Oil  

BMC Air Filter for C7 3.0T & 4.0TT

The panel air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more...

034Motorsport High Pressure Fuel Pump Piston Upgrade for 2.0TSI, 2.5TFSI & 3.0TFSI Supercharged

*This also fits 4.0T Engines but requires 2 Pistons per vehicle* The 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit, 2.0TSI, 2.5TFSI, 3.0TFSI Supercharged is designed to be a drop-in replacement piston for the factory high pressure...

034Motorsport 207MM Crank Pulley Upgrade for Audi 3.0T

NOTE: Performance software is sold separately and is required in order to use this pulley safely and for this pulley to yield a performance benefit. PRODUCT DESCRIPTION: The 034Motorsport 3.0 TFSI Supercharger 207mm Crank Pulley Upgrade for the...

EMD Auto Supercharger Pulley for Audi 3.0T

We are proud to introduce our suphercharger pulley upgrade for the Audi 3.0T engine. In order to create an OEM+ product, our pulley is machined from the same stainless grade as the stock piece. The final bore is honed after machining to ensure a precise...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...