Air Lift 3P/3H Second Compressor Harness

This wiring harness allows you to add a second compressor to any 3P or 3H system.

Neuspeed Rotor Ring Replacements for Neuspeed BBK - 370x34mm

NEUSPEED offers replacement rotor rings with the necessary hardware to refresh your NEUSPEED 2-Piece Front Brake Rotor Kit (Part # 9947LR only). Kit Contents: Rotor Ring (2) - 370mm x 34mm, Grey Iron, Heat Treated, Slotted, 48 Curved Veins, Directional...

Neuspeed Brake Pad Wear Sensor Bypass

If you have installed a new big brake kit or installed new brake pads that do not include a brake pad wear sensor wire, then this is for you! We have developed a bypass device to get rid of the annoying error on your dash. This is an easy plug-and-play,...

Neuspeed Engine Torque Arm Insert for MQB

Under hard acceleration, your entire engine and transmission actually rotate due to compliance with the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...

Neuspeed Macan Brake Upgrade for MQB (Not Incl. Calipers)

*Please Note: This kit does NOT include calipers!!!* The NEUSPEED Macan Brake Upgrade Kit provides big improvements for those upgrading their factory brake systems to the Porsche Macan Caliper Kit. This upgrade kit offers our Full-Floating,...

Neuspeed 27mm Race Series Rear Sway Bar for MK7 & 8V FWD

NEUSPEED RACE SERIES Anti-Roll Bar gives you the ultimate in handling; precision engineered with smooth mandrel bends, aerospace-quality steel, graphite impregnated urethane bushings, hardware and sub-frame support brackets. Recommended for...

Neuspeed Wheel Hanger

Wheel with the tire mounted can weigh up to 50 lbs. On top of that you need to align the lug hole opening to the hub so you can start threading the lug bolts.  During this balancing process you can potentially drop the wheel and damage it,...

Neuspeed Rear Sway Bar End Links for MQB

NEUSPEED Rear Sway Bar Performance Links provide direct transition of suspension movement to the anti-roll bar. Only the best available; highest aluminum strength, highest quality, and perfect fit. Features: CNC machined from billet 7075-T6...

Neuspeed Front Sway Bar End Links

NEUSPEED Front Adjustable Anti-Sway Bar End Links provide direct transition of suspension movement to the anti-sway bar. Only quality went into building these links; higher strength aluminum link over the competitors and custom...

Neuspeed Valve Stem Caps

Set of 4 aluminum caps with ( N ) logo. Only available in black with a white logo.

Neuspeed P-FLO Air Filter

NEUSPEED P-Flo filters are a high-performance, multi-layer cotton gauze oiled air filter that can be cleaned, re-oiled, and used many times over. Notes: Replacement filter for P-Flo Kit numbers: 65.10.46, 65.10.47, 65.10.81, and 65.10.82 Pre-oiled -...

Neuspeed P-FLO Air Intake for MK7 & 8V w/ SAI

NEUSPEED leads the industry with over 40 years of developing aftermarket performance air intakes on VW/Audi vehicles. Others have tried to emulate our work, but no one has been able to match our unique combination of innovation, quality, performance...

Neuspeed Boost Tap for Gen 3/4 1.8T & 2.0T

The NEUSPEED Boost Tap plugs directly into the intake manifold where the factory Manifold Absolute Pressure (MAP) sensor is located. Installing the Boost Tap is an easy and reliable way to tap into the 1.8 TSI and 2.0 TSI engine (Gen 2.5 and...

Neuspeed HI-FLO Turbo Inlet Pipe for 1.8T & 2.0T MQB

NEUSPEED Hi-Flo Turbo Inlet Pipe is a direct replacement for the original plastic inlet pipe, it improves the last restriction of airflow into the turbo. This Inlet Pipe will improve turbo response, increase airflow and less turbo lag. Flow Test: ...

Neuspeed HI-FLO Turbo Discharge Conversion for 6 Speed & Manual

*Does NOT fit facelift models with the 7 Speed DSG* NEUSPEED since 1975, nobody comes close to our record of industry-first aftermarket products for VW/Audi vehicles; we set the industry standards for design, innovation, quality of materials, fit,...