EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 33mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

034Motorsport Dogbone Mount Hardware Kit for MK5, MK6, 8J & 8P

Factory dogbone bolt kit for the MkV/MkVI Volkswagen and 8J/8P Audi. We recommend using these new factory stretch bolts when installing a new dogbone mount pair or the 034Motorsport's Billet Spherical Dogbone Mount. WHAT'S INCLUDED: N10558002 - Bolt,...

Assembled by INS Motor & Transmission Mount Hardware Kit for 8P A3 3.2L & MK5 R32

Plan on removing or replacing your mounts? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their hardware. This hardware is not meant to be re-used and...

034Motorsport Strut Bearing for MK5, MK6, 8J & 8P

Make the most out of your new strut mounts and replace the upper strut bearing while you're in there.  These front bearings see a lot of load from the suspension, and can wear and become noisy over time.  This simple replacement will make for...

034Motorsport Dynamic+ DQ250 DSG Software Upgrade for MK5/MK6 VW & 8J/8P Audi

034Motorsport is proud to offer Stage 1 and Stage 2 DSG Software Upgrades for MkV/MkVI Volkswagen & 8J/8P Audi models equipped with the DQ250 transmission! Stage 1: Increased DSG Clutch Clamping Force No Kickdown Downshifts in Manual Mode Launch...

Vossen Cone Seat Lug Bolts - M14 x 1.5 (Set of 20)

Vossen offers premium, OEM-quality Lug Nuts, Lug Bolts, and Lug Locks for your wheel setup.These accessories are crafted from the strongest raw materials and engineered to maximize both safety and performance for your vehicle. Available in multiple...

Milltek Non-Resonated Catback Exhaust for 8P A3 3.2 (Louder)

Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase...

034Motorsport 17-19mm Adapter Socket Tool

The 034Motorsport 17-19mm Adapter Socket Tool is designed to allow those with 19mm 034Motorsport Stud and Nut sets installed to use their factory 17mm Wheel Bolt Wrench for tightening and loosening. The 034Motorsport 17-19mm is compatible with both...

Neuspeed Sport Brake Lines for PQ35 (w/ 260x12mm Rear Brakes)

NEUSPEED Sport Brake Lines are a great way to improve the performance and safety of your Audi/VW. The stainless steel design resists line expansion associated with OEM rubber lines and are more resistant to being punctured and/or collapsing...

Wilwood SRP Drilled & Slotted Replacement Rotor Rings for Superlite 6R Front Brake Kit for MK5 & MK6

SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the...

Wilwood GT Slotted Replacement Rotor Rings for Superlite 6R Front Brake Kit for MK5 & MK6

GT-48 curved vane rotors are built for the extreme conditions of professional motorsports. The superior heat absorption and dissipation characteristics of these heavy wall directional vane rotors are the keys to preventing heat fade and realizing long...

Wilwood 12.88" Forged Narrow Superlite 6R Front Brake Kit for MK5 & MK6

Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hat) The unsurpassed braking capacity of the Forged Narrow Superlite 6R six-piston caliper serves as the base of this group of 13”-14” big rotor kits for these popular late model vehicles...

BFI Motor Mount Hardware for Complete Replacement Mounts

Did you buy a used BFI mount that didn't come with hardware? Lose the hardware we originally provided? No worries, we've got you covered!  This is a hardware kit for MK4/MK5/MK6/MK7 BFI Complete Replacement Engine and Transmission Mounts, as well as...

SuperPro Front Roll Center Adjusting Ball Joint Kit for MK5 & MK6

Looking for a little more camber adjustment on your MK5 or MK6 platform vehicle? The SuperPro roll center adjusting ball joint kit allows for some camber adjustment (Up to -.5 per side) that the factory control arms lack. The SuperPro roll center...