Neuspeed HI-FLO Charge Pipe for 2.0T FSI (Eliminates Sound Amplifier)

*Does NOT fit 2.0T TSI engines* NEUSPEED's Hi-Flo Air Charge Conversion replaces the OE smashed and kinked plastic pipe located between the factory intercooler and throttle body. Full diameter all the way through and without any unnecessary bends, the...

iSweep Billet Aluminum Oil Pan for EA888 1.8T & 2.0T

*Will NOT fit FSI 2.0T engines*   The iSWEEP EA888 aluminum oil pan is a billet engine oil pan made from 6061-T6 aluminum by CNC machining. The design places cooling fins on the entire lower surface of the oil pan to demonstrate the cooling...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed HI-FLO K04 Turbo Discharge Conversion for MK5, MK6, 8P & 8J 2.0T TSI

*Will NOT fit 2.0T FSI engines* Designed for MOST aftermarket K04 turbo conversion kits, the NEUSPEED K04 Hi-Flow Turbo Discharge Pipe replaces the restrictive EO plastic pipe on the outlet side of the turbocharger. Notes: CARB Exempt. EO#...

Neuspeed HI-FLO Charge Pipe for MK5, MK6, B6, 8P & 8J 2.0T TSI

*Will NOT fit vehicles with 2.0T FSI engines* NEUSPEED's Hi-Flo Air Charge Pipe Conversion replaces the OE smashed and kinked plastic pipe located between the factory intercooler and throttle body. Full diameter all the way through and without any...

Neuspeed P-FLO Air Intake Kit for MK5, MK6 Golf R, B6 & 8P 2.0T FSI w/ K04

*Will NOT fit B6 Passat with TipTronic tranmission OR vehicles with TSI engines* The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in...

Neuspeed HI-FLO K03 Turbo Discharge Conversion for MK5, MK6, 8P & 8J 2.0T TSI

*Will NOT fit 2.0T FSI engines* The NEUSPEED Hi-Flow Turbo Discharge Conversion kit includes all the parts needed to remove serious restriction from the discharge side of the turbocharger. First, a newly machined billet aluminum discharge adapter reduces...

Neuspeed P-FLO Air Intake Kit for MK5, MK6, B6, 8P & 8J 2.0T TSI

*Does NOT fit FSI 2.0T engines or the 2.0T Gen 3* The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in the higher rpm range –...

Neuspeed P-FLO Air Intake Kit for MK5, B6 & 8P 2.0T FSI

*Will NOT fit B6 Passat with TipTronic tranmission OR vehicles with TSI engines* The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low-speed engine performance but becomes very restrictive when the engine is operating in...

Neuspeed Factory Intercooler Delete Kit for MK5, MK6, 8P & 8J

The Factory Intercooler Delete Kit is for vehicles using a Front Mount Intercooler (FMIC) that bypasses factory intercooler and is no longer being used. By removing the unused factory intercooler using the FID kit you will get more airflow, better...

034Motorsport Billet Oil Catch Can Kit for Transverse 2.0T TSI

*Will NOT fit Gen 2 TSI Engines found in later model Jetta GLI, Tiguan or Audi TT or the FSI found in early model MK5's* The 034Motorsport Transverse 2.0 TSI Catch Can Kit is here! We've put months of engineering and testing to create the most complete...

CJM Industries AEM Sensor Mounting Bracket

A simple solution to mount AEM sensors under the hood or in your car. Made of ABS composite. 3D printed part, layer lines are visible. No sensor included, mounting bracket only. Each order will be 1 bracket, 2 zip ties, and VHB tape to adhere to your car...

iAbed Billet Rear Main Seal Kit for VW/Audi TSI

*Fitment Notes: Will NOT fit vehicles with FSI engines. Will NOT fit MK2 Audi TT FWD models* Kit includes: iABED 06H Billet Rear Crankshaft Seal (1) Spring Loaded Rear Main Seal (8) M6 1.0 20mm SS Socket Cap Screws EA888.X Billet Rear Crankshaft Seal...

iAbed Billet Rear Main Seal Installation Tool for VW/Audi

This iAbed Industries installation tool is required for the installation of the iAbed Billet Rear Main Seal kit for VW/Audi vehicles.

034Motorsport Billet Aluminum Rear Main Seal Kit for Late 1.8T & 2.0T

*Fitment Notes: Will NOT fit 2.0 FSI engines in early model MK5, B6, etc.* 034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone stamped steel factory Rear Main Seal on your 2.0T Volkswagen. This Billet Rear Main...