034Motorsport Catch Can Oil Drain Flange Adapter for 2.0T FSI

Finally, a clean easy way to drain oil back to your 1.8T or 2.0T FSI oil pan! Oil drain adapter flange sandwiches between the oil pan and oil drain line to allow a 1/8" NPT fitting to drain into the...

034Motorsport Catch Can Oil Drain Kit for 2.0T

The 034Motorsport Catch Can Oil Drain Kit was designed exclusively for those using our Billet Catch Can Kit on their 2.0T FSI or 2.0 TSI engines. Using the supplied 1/4" hose and 14mm banjo...

034Motorsport Catch Can Oil Drain Kit for MQB

Gone are the days of needing to remove your 034Motorsport Billet Catch Can Kit to empty the contents.The 034Motorsport Catch Can Oil Drain Kit was designed exclusively for those using our Billet...

034Motorsport Clutch Slave Hydraulic Pressure Hose for B5 S4

With the B5 chassis aging past 10 years old, original rubber and plastic components are deteriorating to the point where they need replacement now. Rather than install the same factory part that will...

034Motorsport Coated Main Bearing Set for VR6

Coated main bearing (Crankshaft) set for the VW VR6 motor. First we start with an OE main bearing set, then coat them with the most advanced anti-friction coating available. This bearing...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose,...

034Motorsport Complete Drop-In Fuel Rail Kit for B5 S4 2.7T

This complete fuel rail upgrade kit includes everything needed to install 034Motorsport Billet Aluminum Fuel Rails on 2.7T engines with the S4 intake manifolds. Retains the stock FPR and return...

034Motorsport CREC Supercharger Pulley Upgrade for C7.5 A6/A7, D4 A8 & 4M Q7

At 57.70mm in diameter, the 034Motorsport CREC 3.0 TFSI Supercharger Pulley is significantly smaller than the factory unit in order to increase the drive ratio of the supercharger. Spinning the...

034Motorsport DAZA Turbo Inlet Pipe Adapter Ring for TTE625 & TTE700

PRODUCT DESCRIPTION: This is a 62.8mm billet aluminum adapter ring designed for use with the 034Motorsport 4” Turbo Inlet Pipe and TTE625 or TTE700 aftermarket turbochargers from The Turbo...

034Motorsport Density Line Adjustable Rear Toe Link for Audi B8

Replace your fixed, stamped steel factory rear toe links on your B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, or Q5/SQ5 with this all-new performance engineered adjustable set from 034Motorsport!...

034Motorsport Density Line Adjustable Rear Toe Link for PQ35 & MQB Evo

*Note: This will ONLY fit vehicles equipped with independent rear suspension* Replace your fixed, stamped steel factory rear toe links on your Volkswagen & Audi PQ35 and MQB EVO vehicles with...

034Motorsport Density Line Adjustable Rear Toe Link Kit for MQB

Replace your fixed, stamped steel factory rear toe links on your 8V/8V.5 Audi A3/S3/RS3, MkIII Audi TT/TTS/TTRS or MkVII Volkswagen Golf/GTI/R with this all-new performance engineered adjustable set...

034Motorsport Density Line Adjustable Rear Toe Links for Audi B9

PRODUCT DESCRIPTION: Replace your fixed, stamped steel factory rear toe links on your B9/B9.5 Audi A4/S4/RS4 & A5/S5/RS5 with this performance engineered adjustable set from...

034Motorsport Density Line Adjustable Rear Upper Control Arm Pair for PQ35, MQB & MQB Evo

We're proud to offer 034Motorsport Density Line Rear Adjustable Upper Control Arms for Volkswagen & Audi PQ35, MQB, and MQB EVO applications! 034Motorsport's Density Line Rear Adjustable Upper...

034Motorsport Density Line Adjustable Upper Control Arm Kit for Audi B5, B6, B7 & C5

034Motorsport is proud to offer our fully adjustable upper control arms for the B5/B6/B7 and C5 chassis cars! These arms are perfect for those who have lowered their car from factory ride height and...