APR Roll-Control Front Sway Bar for AWD MQB & MQB Evo

*Please Note: Designed for All wheel drive (AWD) vehicles.* APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without greatly impacting comfort. Drivers who enjoy a more spirited...

APR Roll-Control Rear Sway Bar for AWD MQB & MQB Evo (Non RS Haldex)

*Please Note: Designed for all wheel drive (AWD) vehicles with the standard haldex unit (Non-RS/22+ R/25+ S3).*   APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without...

Neuspeed Billet biAXIS Front Upper Strut Mounts for MQB & MQB Evo

Introducing the NEUSPEED Billet biAXIS Upper Strut Mounts, meticulously engineered for Audi and Volkswagen MQB/MQBevo chassis vehicles. They enhance vehicle handling dynamics by providing fine-tuned control over two-axis geometry...

034Motorsport Extended Tie Rod End Kit for PQ35, MQB & MQB Evo

Note: MQB-Evo (8Y & MK8) fitment Extended Tie Rods are coming soon! Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or...

APR Roll-Control Coilover System for MQB & MQB Evo

*Fitment Note: Does NOT fit vehicles with torsion beam rear axle* The APR Roll-Control Coilover System offers a wide range of adjustment to fully customize your vehicle's suspension setup! The system comes complete with front and rear struts and dampers,...

Whiteline Front Control Arm Geometry Correction Kit for MQB

Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics...

Whiteline Front Strut Mount Kit for MQB

Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high...

Whiteline Front Lower Control Arms for MQB (Max-C)

IMPORTANT NOTES - Complete pair of Alloy arms - adds 0.5 to 3.0 deg positive caster and -0.25deg camber Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press...

Genuine VW / Audi Strut Mount Bearing for MQB

This is a genuine replacement front upper strut mount bearing for most VW & Audi MQB models. Sourced from our local VW dealership, so you're guaranteed a genuine part!   Part Number: 5Q0 412 249 E, 5Q0412249E, 5Q0-412-249-E

034Motorsport Strut Mount Bearing for MQB & MQB Evo

Make the most out of your new Density Line Strut Mounts and replace the upper strut bearing while you're in there. These front bearings see a lot of load from the suspension, and can wear and become noisy over time. This factory replacement strut bearing...

ST XTA Plus 3 Coilovers for MK7 GTI & Golf R

The ST XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge. From the factory, the ST XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression...

B2BFAB Upgraded Front Sway Bar End Links for use with Camber Correcting Lift Kit

After testing countless configurations we found the balance of features to perfectly compliment our line of camber correcting lift kits. These links manufactured by Whiteline, with our specifications this kit features an optimized length, robust...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...