APR Roll-Control Front Sway Bar for FWD MQB & MQB Evo

*Please Note: Designed for front wheel drive (FWD) vehicles.* APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without greatly impacting comfort. Drivers who enjoy a more...

APR Roll-Control Rear Sway Bar for FWD MQB & MQB Evo

*Please Note: Designed for front wheel drive (FWD) vehicles with independent rear suspension.*   APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without greatly impacting...

034Motorsport Extended Tie Rod End Kit for PQ35, MQB & MQB Evo

Note: MQB-Evo (8Y & MK8) fitment Extended Tie Rods are coming soon! Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or...

Assembled by INS Subframe Hardware Kits for FWD MQB

Plan on removing or replacing your front or rear subframes? About to install a subframe alignment kit? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their...

APR Roll-Control Coilover System for MQB & MQB Evo

*Fitment Note: Does NOT fit vehicles with torsion beam rear axle* The APR Roll-Control Coilover System offers a wide range of adjustment to fully customize your vehicle's suspension setup! The system comes complete with front and rear struts and dampers,...

Whiteline Front Strut Mount Kit for MQB

Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high...

B2BFAB Upgraded Front Sway Bar End Links for use with Camber Correcting Lift Kit

After testing countless configurations we found the balance of features to perfectly compliment our line of camber correcting lift kits. These links manufactured by Whiteline, with our specifications this kit features an optimized length, robust...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 57.1mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & Volkswagen vehicles with a 57.1mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...