034Motorsport High Pressure Fuel Pump Piston Tool for EA888 Gen 3 2.0T & C7/C7.5 4.0T

The 034Motorsport High Pressure Fuel Pump Tool is designed to make the disassembly and reassembly of EA888 Gen 3 2.0T & C7/C7.5 S6/S7/S8/RS7 4.0T high pressure fuel pumps a breeze! This tool was designed for ease of use with a 1/2” ratchet...

034Motorsport Billet Coolant Vent Union for EA888 Gen 3 & Gen 4 2.0T & 1.8T Engines

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant...

RacingLine Replacement O-Rings for Magnetic Oil Pan Drain Plug for Plastic Oil Pan (5 Pack)

Looking for replacement o-rings for your RacingLine magnetic oil pan drain plug on your plastic oil pan MQB? You're in luck!Sold in packs of 5.

BFI Motor Mount Hardware for Complete Replacement Mounts

Did you buy a used BFI mount that didn't come with hardware? Lose the hardware we originally provided? No worries, we've got you covered!  This is a hardware kit for MK4/MK5/MK6/MK7 BFI Complete Replacement Engine and Transmission Mounts, as well as...

APR Throttle Booster w/ Wireless Controller & Bluetooth Mobile App

The APR Throttle Booster instantly transforms the way your vehicle feels by customizing how quicky your throttle or accelerator pedal works. Simply plug it in and either use the wireless controller or smart phone app to set or customize how the pedal...

EQT 5 Bar TMAP/PUT Sensor Package for EA888.3

Whenever upgrading your turbocharger to a larger than stock unit, and looking to produce more than 29Psi of boost pressure (Manifold Relative Pressure / Boost) you need to upgrade your TMAP and PUT Sensor in order to allow the ECU proper visibility and...

EQT 5 Bar PUT Sensor for EA888.3

The perfect companion for an EQT 5 Bar TMAP is here with the new EQT 5 Bar PUT Sensor! Now with both sensors squared tuning and installation is even easier. Both the EQT TMAP and PUT sensor utilize the same scaling and you never have to worry about...

EQT 5 Bar TMAP Sensor for EA888.3

After months of prototyping and testing, we are pleased to finally announce our in-house offering of a TRULY plug-and-play solution for a 5bar TMAP sensor! Not only does this sensor contain the factory style temperature compensated circuitry, it...

Assembled by INS Dogbone Mount Hardware Kit for MQB 6 Speed DSG & Manual

*Fitment Note: Does NOT fit DQ381 7 Speed DSG transmissions!* Plan on removing or replacing your dogbone mount? About to install an upper dogbone insert? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield...

EMD Auto Billet Oil Cooler Union for EA888 Gen 3 MQB

A common item that is replaced when servicing the water pump and thermostat assembly, the stock oil cooler union is made of cheap plastic that can crack over time. We offer our billet replacement piece, which includes new OEM o-rings for a more robust...

VW / Audi Oil Drain Plug for EA888 w/ Plastic Oil Pan

Doing an oil change the old school way? Replace the drain plug! These are considered to be one-time use and the o-rings are not sold separately.   OEM Part Number Cross Reference: 06L 103 801, 06L103801, 06L-103-801

APR Throttle Body Hose for 1.8T & 2.0T MQB

APR is pleased to present the ultimate boost hose upgrade for MQB platform vehicles with the 1.8T and 2.0T engines! The APR Boost Hose System is a comprehensive, direct replacement upgrade, to the factory rubber hoses found in the charge piping system...

APR Boost Tap Kit for 1.8T & 2.0T Gen 3 MQB

Traditionally boost is tapped by spacing out the factory T-MAP sensor on top of the intake manifold. However, APR's engineers discovered using this location lead to inconsistencies in intake air temperature readings and potentially a loss of power. Upon...

BMC Complete Filter Washing Kit

This BMC Filter Cleaning Kit Includes: 500ml Bottle of Detergent 250ml Bottle of Filter Oil  

RacingLine SAI Filter for R600 Intakes

This adapter allows the use of a RacingLine R600 Cold Air Intake on vehicles equipped with Secondary Air Injection.