Neuspeed Billet biAXIS Front Upper Strut Mounts for MQB & MQB Evo

Introducing the NEUSPEED Billet biAXIS Upper Strut Mounts, meticulously engineered for Audi and Volkswagen MQB/MQBevo chassis vehicles. They enhance vehicle handling dynamics by providing fine-tuned control over two-axis geometry...

APR Open PEX Intake System for EA211 1.4T

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! The APR Open PEX Intake System is the best dollar-per-horsepower intake system for the 1.4T Engine! We've maximized performance and sound dramatically by removing flow restrictors, reducing pressure...

Whiteline Front Control Arm Geometry Correction Kit for MQB

Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics...

Whiteline Front Strut Mount Kit for MQB

Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high...

Whiteline Front Lower Control Arms for MQB (Max-C)

IMPORTANT NOTES - Complete pair of Alloy arms - adds 0.5 to 3.0 deg positive caster and -0.25deg camber Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press...

Genuine VW / Audi Strut Mount Bearing for MQB

This is a genuine replacement front upper strut mount bearing for most VW & Audi MQB models. Sourced from our local VW dealership, so you're guaranteed a genuine part!   Part Number: 5Q0 412 249 E, 5Q0412249E, 5Q0-412-249-E

034Motorsport Strut Mount Bearing for MQB & MQB Evo

Make the most out of your new Density Line Strut Mounts and replace the upper strut bearing while you're in there. These front bearings see a lot of load from the suspension, and can wear and become noisy over time. This factory replacement strut bearing...

B2BFAB Upgraded Front Sway Bar End Links for use with Camber Correcting Lift Kit

After testing countless configurations we found the balance of features to perfectly compliment our line of camber correcting lift kits. These links manufactured by Whiteline, with our specifications this kit features an optimized length, robust...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...