BLOX Racing Neoprene Coilover Covers (Pair)

BLOX Racing Coilover Covers are made from heavy duty neoprene and feature hand-stitched hems for additional durability. The tops and bottoms of each cover feature elastic hems that help secure them around the coilover springs. Fits BLOX Racing Tuner,...

Neuspeed Billet biAXIS Front Upper Strut Mounts for MQB & MQB Evo

Introducing the NEUSPEED Billet biAXIS Upper Strut Mounts, meticulously engineered for Audi and Volkswagen MQB/MQBevo chassis vehicles. They enhance vehicle handling dynamics by providing fine-tuned control over two-axis geometry...

GFB DV+ Diverter Valve w/ Integrated Solenoid

The T9381 is the latest addition to the DV+ family, and offers all the benefits you’d expect from a DV+: Sharper throttle response Faster boost recovery after gearshift or brief throttle lift Improved boost holding Unrivalled longevity, backed...

034Motorsport Extended Tie Rod End Kit for PQ35, MQB & MQB Evo

Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or Volkswagen PQ35, MQB, and MQB Evo allows you to run Dynamic+ RCO Ball Joints and...

RacingLine Replacement O-Rings for Magnetic Oil Pan Drain Plug for Plastic Oil Pan (5 Pack)

Looking for replacement o-rings for your RacingLine magnetic oil pan drain plug on your plastic oil pan MQB? You're in luck!Sold in packs of 5.

Whiteline Front Lower Control Arms for MQB (Max-C)

IMPORTANT NOTES - Complete pair of Alloy arms - adds 0.5 to 3.0 deg positive caster and -0.25deg camber Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 33mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...