SPC Performance Adjustable Front Strut Mount Kit for MK4

This front strut mount kit will add -1 to +1 degrees of camber or caster Now it is possible to adjust the your camber with a full range of camber kits. These kits will provide positive or negative...

SPC Performance Adjustable Rear Camber Arm (Individual)

*Priced Each - Be sure to order two kits if you need both sides.* Adjust camber in the rear of many popular VW and Audi models ±3° with this fully adjustable rear camber arm from SPC. The...

SPC Performance EZ Shim Spacer Kit (set of 8)

These shims are used to shim the caliper, typically when using camber/caster shims.

SPC Performance MK4 Rear Negative Camber Shim -.5 Degree

This particular shim adds -.5 degree of camber   You will need a special wrench to remove the rear hub assembly. SPC Performance VW Rear Shim Wrench You will likely need to shim the calipers as...

SPC Performance MK4 Rear Negative Camber Shim -1 Degree

This particular shim adds -1 degree of camber   You will need a special wrench to remove the rear hub assembly. SPC Performance VW Rear Shim Wrench You will likely need to shim the calipers as...

SPC Performance MK4 Rear Positive Camber Shim +.5 Degree

This particular shim adds +.5 degree of positive camber   You will need a special wrench to remove the rear hub assembly. SPC Performance VW Rear Shim Wrench You will likely need to shim the...

SPC Performance MK4 Rear Positive Camber Shim +1 Degree

This particular shim adds +1 degree of positive camber   You will need a special wrench to remove the rear hub assembly. SPC Performance VW Rear Shim Wrench You will likely need to shim the...

SPC Performance MK4 Rear Toe Shim .13 degrees

This particular shim adds .13 degrees of toe   You will need a special wrench to remove the rear hub assembly. SPC Performance VW Rear Shim Wrench You will likely need to shim the calipers as...

SPC Performance MK4 Rear Toe Shim .38 degrees

This particular shim adds .38 degrees of toe   You will need a special wrench to remove the rear hub assembly. SPC Performance VW Rear Shim Wrench You will likely need to shim the calipers as...

SPC Performance VW Rear Shim Wrench

VW SHIM WRENCH Designed to remove the rear hub when installing our 71520 and 71530 Series Volkswagen shim. This wrench is a must in assisting the installer when using these camber and toe shims.