Product Description
RacingLine Rear Adjustable Sway Bar End Links for MQB & MQB Evo
Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements.
Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.
- Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm.
- Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar.
- As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars.
- Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier.
- Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time.
ADJUSTABLE
When you lower ride height, the geometry will now be adding preload to your anti roll bar. It's vital to adjust this back to neutral with the +/- 5mm adjustment built-in.
PRECISE
Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. Increase durometer rubber bushing creates direct response for anti-roll bar under cornering conditions.
RACE-PROVEN
Developed for our race cars - adjusting out the sway bar preload allows the anti roll bar to work within its correct operating envelope is an essential part of geometry set-up.
PRECISION ENGINEERED FOR PERFECT PERFORMANCE.
- Motorsport-specification ball joint ends - high strength teflon-lined steel
- +/- 5mm of adjustable length with stainless steel insert to zero Anti Roll Bar preload
- Increase durometer rubber bush to create direct response for anti-roll bar under cornering conditions
- Rubber dust boots fitted to protect the joints
- Left / Right threaded ends make for easy length adjustment in-situ without having to detach and re-attach
- Lightweight CNC-machined 6061-T6 Aluminum bodies with beautiful gloss black anodised coating
