Product Description
CJM Industries V4 Chassis Mounted Front Splitter for MK7 Golf R
All sales are final. This item does not qualify for free shipping
This product ships in 3-5 business days.
Made in USA - 2 year warranty.
This is our V4 kit with a blade. If you are interested in just purchasing brackets they can be found here.
Please read these product details thoroughly for fitment and installation requirements. This can be completed in a driveway with basic tools. Please review the install sheet and tool list to understand what is involved in the process. Professional install recommended if you are not comfortable removing the front crash bar.
- Brackets & rods come in raw aluminum, expect some visible imperfections in the material from the cutting and bending process.
- This will not fit with any front mount/twin intercooler.
- If you are on air ride, do not air-out onto these brackets, they are not designed to support the weight of an entire vehicle.
- Speed tested to 160mph.
- Requires drilling four 11mm holes in the crash bar for install.
- Trimming of the factory splash guard is required (not the bumper).
- Brackets are made of 5052 Aluminum, these mount to 6 points of the chassis/crash bar.
- The brackets and rods are raw aluminum and contain zinc coated steel hardware.
- If you are in a region that salts the roads in the winter, this will increase the need to clean and maintain each component more frequently. We can apply a clear coating called Sharkhide, but it will not last forever, you will need to recoat them over time to If you want to prevent discoloration over time. You can also powdercoat or paint with a rattle can for easier maintenance.
Each Order includes:
- Top Driver & Passenger side Bracket
- 2x bottom Brackets with pre-installed rivnuts for the lip/blade
- Center support brace with pre-installed rivnuts for the lip/blade
- Flange head bolts and nylock hardware for adjustable height settings
- M10 Flange head bolts and nylock hardware to mount to the Chassis.
- M10 countersunk hardware to attach a blade to brackets (3/8" or thinner blade)
- 9mm thick splitter blade with a radiused edge
- Printed Install Sheet with pictures
- 35lbs - ships in a 24"x72"x5" box
Add on options (not included):
- Front support rods - Aluminum rods, coated steel heims, stainless hardware. Recommended for blades over 60mm to prevent flutter. (60mm does not need them).
- Drill bit - 11mm step bit & 4mm pilot bit
Disclaimer - Off road use only, not intended to be used on public roads. This product may alter the handling of the vehicle. The buyer is responsible for all modifications made to your car. CJM Industries llc & It's Not Stock, LLC assumes no responsibility or liability as a result from altering your car with our products. This product may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to conform to all applicable laws and regulations for road use, especially pertaining to safety.
