Product Description
B2BFAB Camber Correcting Lift Kit for Atlas & Cross Sport
Just facts - The B2BFAB Camber Correcting Lift Kit is the only kit on the market for your Atlas that provides the 1.5" lift you want without sacrificing handling or proper alignment specifications!
The Overview: The owners of B2BFAB developed the first lift kit for the MQB platform in 2016. (MQB platform = shared chassis that Atlas, Tiguan, Alltrack, Taos, Golf, Jetta, Audi A3, Q3, etc are produced on.) The original design was simple, and many companies began to produce duplicates, all the while we stayed focused on solving its inherent shortcomings. After 5 years, numerous prototypes, and countless hours of time and testing, we are proud to introduce our kit that remedies the issue plaguing every other MQB lift kit on the market. We introduce the B2BFAB MQB Camber Correcting Lift Kit!
The Problem: For the MQB platform and the majority of road going vehicles a small amount of negative camber is dialed into the front and rear suspension to offer proper handling. When a MQB platform vehicle is lifted with a traditional lift kit, the negative camber of the front wheels is reduced or removed. With no camber adjustment present on the front suspension components, zero camber or even positive camber is unavoidable.
"Why do I care?", you might ask. Let us explain. The proper amount of negative camber ensures the optimal contact patch between the tire and the road through all handling maneuvers. When front camber is outside the manufacturers specified range in the positive direction, the handling is floaty, twitchy, and generally unstable at highway speeds. While many vehicles have an adjustment for this, the front of the MQB platform does not.
The Solution: By offsetting the upper mounting point of the front struts our lift kit removes the excessive positive camber allowing proper suspension geometry and specifications.
*Color Install instructions included.*
We STRONGLY RECOMMEND replacing ALL one time use hardware during the install to ensure proper torque specs and avoid hardware failure. Upgraded Complete OEM Hardware Kit is available HERE.
To limit fender liner rubbing issues and ensure maximum clearance with upgraded tires use our BFT Block kit available HERE.
Adaptive headlight equipped models (only available 2021+) use our sensor mount relocation bracket available HERE.
For 2.0T Atlas models the front sits slightly higher in stock form and this is still noticeable when lifted. To avoid reverse rake we suggest our additional .5" rear lift spacer available HERE.
*Our lift kit is not recommended to combine with other lifting options.
Fits
Volkswagen Atlas 2018 to 2024 2.0T 4Motion
Volkswagen Atlas 2018 to 2024 2.0T FWD
Volkswagen Atlas 2018 to 2023 3.6L V6 4Motion
Volkswagen Atlas 2018 to 2023 3.6L V6 FWD
Volkswagen Atlas Cross Sport 2020 to 2024 2.0T 4Motion
Volkswagen Atlas Cross Sport 2020 to 2024 2.0T FWD
Volkswagen Atlas Cross Sport 2020 to 2023 3.6L V6 4Motion
Volkswagen Atlas Cross Sport 2020 to 2023 3.6L V6 FWD