Hawk Performance Ceramic Front Brake Pads with wear sensor (MK4 288 & 312mm rotors)

Luxury performance cars have contributed to customer demand for a low dust, performance brake product. Hawk Performance Ceramic Brake Pads offers a premium, high-performance, ultra-low-dust, low-noise compound called Performance Ceramic. This...

ARP Pro Series Turbo Head Stud Kit for 1.8T 20V Early AEB - M11 (with tool)

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today. For openers, ARP uses a...

ARP Pro Series Turbo Head Stud Kit for 1.8T 20V Early AEB - M11 (without tool)

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today. For openers, ARP uses a...

ARP Pro Series Turbo Head Stud Kit for 1.8T 20V - M10 (with tool)

*Fitment Note: Does NOT fit AEB heads* It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the...

ARP Pro Series Turbo Head Stud Kit for 1.8T 20V - M10 (without tool)

*Fitment Note: Does NOT fit AEB heads* It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the...

ARP Pro Series Turbo Head Bolt Kit for 1.8T 20V - M10 (with tool)

*Fitment Note: Does NOT fit AEB heads* It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the...

ARP Pro Series Turbo Head Bolt Kit for 1.8T 20V - M10 (without tool)

*Fitment Note: Does NOT fit AEB heads* It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...